Chrysler 2010 PT Cruiser Owner'S Manual Download Page 21 | Manualshive

Page: 21 / 400

Chrysler 2010 PT Cruiser Owner'S Manual Download Page 21

REMOTE KEYLESS ENTRY (RKE)

This system allows you to lock or unlock the doors and
liftgate, or activate the Panic Alarm from distances ap-
proximately 66 ft (20 m) using a hand-held RKE trans-
mitter. The RKE transmitter does not need to be pointed
at the vehicle to activate the system.

NOTE:

The line of transmission must not be blocked

with metal objects.

To Unlock the Doors and Liftgate

Press and release the UNLOCK button on the RKE
transmitter once to unlock only the driver’s door or twice
to unlock all the doors and liftgate. When the UNLOCK
button is pressed, the illuminated entry will initiate and
the parking lights will flash on twice. The time for this
feature is programmable on vehicles equipped with
Electronic Vehicle Information Center (EVIC). Refer to
“Electronic Vehicle Information Center (EVIC)/Personal
Settings (Customer-Programmable Features)” in “Under-
standing Your Instrument Panel” for further information.

NOTE:

The system can also be programmed to unlock

all doors on the first press of the UNLOCK button. For

Three Button Remote Keyless Entry (RKE) Transmitter

20

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
19
20
21
22
23
...
»

Summary of Contents for 2010 PT Cruiser

















































































































































































































































































































































































































Reviews:

No comments