Chrysler 2007 Sebring Sedan Instruction Manual Download Page 48 | Manualshive

Page: 48 / 376

Chrysler 2007 Sebring Sedan Instruction Manual Download Page 48

WARNING!

Ignoring the AIRBAG light in your instrument panel
could mean you won’t have the airbags to protect
you in a collision. If the light does not come on, stays
on after you start the vehicle, or if it comes on as you
drive, have the airbag system checked right away.

Impact Sensors

Two sensors, located on the front body structure, trigger
airbag deployment in direct frontal impacts and aid the
Occupant Restraint Controller (ORC) in determining
appropriate response to frontal impact events. Additional
sensors in the ORC determine the level of airbag deploy-
ment and provide verification.

Side Inflatable Curtain and Front Seat Mounted
Airbags

The Occupant Restraint Controller System (ORC) de-
ploys the side inflatable curtain and seat mounted thorax
side airbags during collision with other vehicles and
during collisions where the impact is confined to a
particular area of the vehicle — such as collisions with
poles, trees or similar objects.

It will deploy the side inflatable curtains and front seat
thorax mounted airbags only on the impact side of the
vehicle.

The front driver and passenger seat contain inflatable
side airbags to protect the occupant from impact injuries.
Correctly functioning front passenger seat components
are critical for the Occupant Restraint Controller System
(ORC) to properly classify the front passenger and calcu-
late the proper airbag deployment. Do not make any
modifications to the front passenger seat components,
assembly, or to the seat cover.

48

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
46
47
48
49
50
...
»

Summary of Contents for 2007 Sebring Sedan

























































































































































































































































































































































































Reviews:

No comments