Chrysler 2007 Sebring Sedan Instruction Manual Download Page 325

Page: 325 / 376

2. Remove the two plastic wing nuts from the tail lamp
housing.

3. Grasp the tail lamp and pull firmly outward pushing
gently on the studs from inside to disengage the lamp
housing.

4. Twist and remove socket from lamp.

5. Remove bulb from socket and replace.

Changing the Trunk Lid Tail Lamps

1. With the trunk lid open, unplug the lamp assembly.

2. Remove and replace the bulb.

3. Reinstall the lamp assembly locking in place.

Location Plastic Wing Nuts

Trunk Lid Tail Lamp

MAINTAINING YOUR VEHICLE

325

Summary of Contents for 2007 Sebring Sedan

























































































































































































































































































































































































Search results

Summary of Contents for 2007 Sebring Sedan

Reviews:

Chrysler 2007 Sebring Sedan, Instruction Manual, Page: 325 / 376

Search results

Summary of Contents for 2007 Sebring Sedan

Reviews: