Chrysler 200 CONVERTIBLE 2013 Owner'S Manual Download Page 473

Page: 473 / 519

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life.

4. Pull the bulb out of the socket and replace the bulb.

5. If the bulb comes in contact with any oily surface,

clean the bulb with rubbing alcohol.

6. Reinsert the bulb and socket assembly and rotate

clockwise one-quarter turn to secure.

MAINTAINING YOUR VEHICLE 471

Summary of Contents for 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 CONVERTIBLE 2013

Reviews:

Chrysler 200 CONVERTIBLE 2013, Owner'S Manual, Page: 473 / 519

Search results

Summary of Contents for 200 CONVERTIBLE 2013

Reviews: