Chrysler 200 CONVERTIBLE 2013 Owner'S Manual Download Page 237

Page: 237 / 519

MINI-TRIP COMPUTER — IF EQUIPPED

The Mini-Trip Computer is located in the instrument

cluster and features a driver-interactive trip information

and temperature display.

NOTE:

The system will display the last known outside

temperature when starting the vehicle and may need to

be driven several minutes before the updated tempera-

ture is displayed. Engine temperature can also affect the

displayed temperature; therefore, temperature readings

are not updated when the vehicle is not moving.

Control Buttons

STEP Button

Press the STEP button located on the steering wheel to

scroll through sub menus (i.e., Temperature, Trip Func-

tions: Odometer, Trip A, Trip B).

Mini-Trip Control Buttons

UNDERSTANDING YOUR INSTRUMENT PANEL 235

Summary of Contents for 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 CONVERTIBLE 2013

Reviews:

Chrysler 200 CONVERTIBLE 2013, Owner'S Manual, Page: 237 / 519

Search results

Summary of Contents for 200 CONVERTIBLE 2013

Reviews: