Chrysler 200 CONVERTIBLE 2013 Owner'S Manual Download Page 245

Page: 245 / 519

4. Press and release the SELECT button and the “CAL”

indicator will start flashing.

5. Drive the vehicle slowly (under 5 mph / 8 km/h),

completing one or more circles (in an area free from

large metal or metallic objects) until the “CAL” indi-

cator turns off. The compass will now function nor-

mally.

Compass Variance

Compass Variance is the difference between Magnetic

North and Geographic North. To compensate for the

differences, the variance should be set for the zone where

the vehicle is driven, per the zone map. Once properly

set, the compass will automatically compensate for the

differences and provide the most accurate compass head-

ing.

NOTE:

Magnetic and battery powered devices, (such as

cell phones, iPod’s, radar detectors, PDA’s and laptops)

should be kept away from the top of the instrument

panel. This is where the compass module is located and

such devices may interfere and cause false compass

readings.

Compass Variance Map

UNDERSTANDING YOUR INSTRUMENT PANEL 243

Summary of Contents for 200 CONVERTIBLE 2013








































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 CONVERTIBLE 2013

Reviews:

Chrysler 200 CONVERTIBLE 2013, Owner'S Manual, Page: 245 / 519

Search results

Summary of Contents for 200 CONVERTIBLE 2013

Reviews: