Chrysler 200 2017 Owner'S Manual Download Page 529

Page: 529 / 557

Maintenance Chart

Required Maintenance Intervals

Refer to the maintenance schedules on the following page
for the required maintenance intervals.

At Every Oil Change Interval As Indicated By Oil

Change Indicator System:

•

Change oil and filter

•

Rotate the tires.

Rotate at the first sign of irregular

wear, even if it occurs before the oil indicator
system turns on.

•

Inspect battery and clean and tighten terminals as
required

•

Inspect brake pads, shoes, rotors, drums, hoses and
park brake

•

Inspect engine cooling system protection and hoses

•

Inspect exhaust system

•

Inspect engine air cleaner if using in dusty or
off-road conditions

MAINTENANCE SCHEDULES

527

Summary of Contents for 200 2017














































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 2017

Reviews:

Chrysler 200 2017, Owner'S Manual, Page: 529 / 557

Search results

Summary of Contents for 200 2017

Reviews: