Home
/
Chrysler
/
200 2017
/
Owner'S Manual

Chrysler 200 2017, Owner'S Manual, Page: 118 / 557

Share

Page: 118 / 557

Chrysler 200 2017 Owner'S Manual Download Page 118

Manual Front Seat Recline Adjustment

To adjust the seatback, lift the lever located on the outboard
side of the seat, lean back to the desired position and
release the lever. To return the seatback, lift the lever, lean
forward and release the lever.

WARNING!

Do not ride with the seatback reclined so that the
shoulder belt is no longer resting against your chest. In
a collision, you could slide under the seat belt, which
could result in serious injury or death.

Manual Seat Height Adjustment — If Equipped

The driver’s seat height can be raised or lowered by using
a lever, located on the outboard side of the seat. Pull
upward on the lever to raise the seat height or push
downward on the lever to lower the seat height.

Recline Lever

Seat Height Adjustment

116

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
116
117
118
119
120
...
»

Summary of Contents for 200 2017














































































































































































































































































































































































































































































































































































Reviews:

No comments