Chrysler 200 2017 Owner'S Manual Download Page 283

Page: 283 / 557

•

Messages

•

Screen Setup

•

Settings

The system allows the driver to select information by
pushing the following buttons mounted on the steering
wheel:

•

Up Arrow Button

Push and release the

arrow button to scroll

upward through the Main Menu items.

•

Down Arrow Button

Push and release the

down

arrow button to scroll

downward through the Main Menu items.

•

Right Arrow Button

Push and release the

right

arrow button to access

the information screens or submenu screens of a
main menu item.

•

Back/Left Arrow Button

Push and release the

left

arrow button to return

to a main menu item from an information or
submenu screen.

•

OK Button

Push the

button to access/select the information

screens or submenu screens of a Main Menu item. Push
and hold the

arrow button for one second to reset

displayed/selected features that can be reset.

Instrument Cluster Display Control Buttons

UNDERSTANDING YOUR INSTRUMENT PANEL

281

Summary of Contents for 200 2017














































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 200 2017

Reviews:

Chrysler 200 2017, Owner'S Manual, Page: 283 / 557

Search results

Summary of Contents for 200 2017

Reviews: