English
–
V.202106
USB and Ethernet Stand Alone interface
8
Datasheet / Technical manual
Clock and calendar setting
In Clock mode (advanced function menu F4) "YE" shows the current year setting.
Use the + and - buttons to select the correct year and confirm by pressing the
button.
Repeat this procedure to set month (Mo), day (dA), hour (ho) and minutes (Mi).
After confirming the minutes,
“
CL
”
will blink to confirm that the new configuration is saved to memory.
The interface clock is now calibrated to your new setting.
This function is useful for setting the interface clock directly on site and without the use of a computer.
USB CONNECTION (D CONNECTION)
After installing the control software and the USB drivers, use the USB cable to connect the interface to the computer.
Windows drivers installation: Before opening the software for the first time, it is possible to check that the drivers were
properly installed during the software installation:
Go to the device manager and check that this icon is visible under « Universal Serial Bus controllers»:
If there is a warning icon on the DMX512 Stand Alone Device
the drivers will require manual installation.
Mac and Linux drivers are automatically installed. In Mac OS, check the « USB device tree ».
In Linux, use the command « lsusb » to check if the « DMX 512 Stand Alone device » line is visible.
Once connected, start the software
and select “USB"
. All connected interfaces will be detected and displayed in the list.
Uncheck any interfaces that are not needed.
Multiple USB connections (example system diagram using USB hub)
