Studio One 100 V User Manual
6
V1.0 September 2015
www.chroma-q.com
2.5
Control
The Studio One 100 V is controlled remotely via ANSI E1.11 USITT DMX512-A protocol or can operate as a standalone unit
with the wireless IR Remote. The control functions can be accessed through the LCD display at the rear of the fixture with 4
push buttons.
Back Arrow
(Enter) Stores the menu choice
Up Arrow
Increases (+) the mode level or value
Down Arrow Decreases (-) the mode level or value
Exit
Back to the previous menu
Power-Up Display:
On power-up, the display shows the Brand, Model Name and Software Version for 5 seconds then goes on to show the Main
Menu. The Main Menu shows:
•
Model Name
•
DMX Status
•
DMX Address
•
Set Control Personality (Mode)
•
Number of Assigned Channels
Display Mode:
The LCD is backlit when you access the menus. This will switch off when left undisturbed for 10 seconds.
Personality:
The Studio One 100 V features a single Warm and Cold White LED engine which can be controlled through four Personality
modes:
