Chroma Color Force Compact, User Manual

Page: 23 / 43

Color Force Compact User Manual 23 V1.8.1 December 2014
www.chroma-q.com
and then the main menu. This will unlink previous signal connections.
Proceed to set the transmitter unit.
Upon completion of a successful link with the transmitter unit, the main menu displays “w
w w w_” and the DMX signal
level is indicated by the horizontal bars beside it. (5 bars maximum) The menu display will indicate “wx
wx wx
wx” if there is
no signal connection.
B. Set the external Wireless DMX Transmitter/Transceiver:
Please refer to the User Manual of the external Transmitter/Transceiver unit for the steps to initiate signal/link with
the Compact PSU receiver unit.
To activate the wireless DMX connection between a Compact PSU unit as the Transmitter and the next Compact
PSU unit as the Receiver:
A. Set the Compact PSU unit as the Receiver unit:
1. From the main menu, scroll and select Wireless Wireless Wireless Wireless
2. In Wireless
Wireless Wireless
Wireless, select Receiver
Receiver Receiver
Receiver
3. Press Enter for 2 seconds to save and display shows Wireless Wireless Wireless Wireless
4. Press Enter, display shows Receiver Receiver Receiver Receiver
5. Press Enter, display shows Unlink Unlink Unlink Unlink frm Trnsm frm Trnsm frm Trnsm frm Trnsm
6. Press Enter, Unlink frm Trnsm
Unlink frm Trnsm Unlink frm Trnsm
Unlink frm Trnsm blinks for a few seconds until the display goes back to the previous menu
and then the main menu. This will unlink previous signal connections.
Proceed to set next Compact PSU as the transmitter unit.
B. Set the Compact PSU as the Transmitter unit:
Connect DMX control to the Compact PSU unit via XLR5 cable.
1. From the main menu, scroll and select Wireless Wireless Wireless Wireless
2. In Wireless, Wireless, Wireless, Wireless, select Transmitter Transmitter Transmitter Transmitter
3. Press Enter for 2 seconds to save and display will show Wireless Wireless Wireless Wireless
4. Press Enter, display shows Transmitter
Transmitter Transmitter
Transmitter
5. Press Enter, display shows Add Receivers Add Receivers Add Receivers Add Receivers
6. Press Enter, Add Receivers Add Receivers Add Receivers Add Receivers blinks for a few seconds until the display goes back to the previous menu and
then the main menu. The unit is initiating signal/link search.
Note:
The Compact PSU transmitter unit that is not connected to DMX control console continues to send wireless signal
link to the Compact PSU receiver units.
C. To unlink receivers from the Compact PSU transmitter unit:
From the main menu of the Compact PSU transmitter unit,
1. From the main menu, scroll and select Wireless Wireless Wireless Wireless
2. In Wireless Wireless Wireless Wireless, select Transmitter Transmitter Transmitter Transmitter
3. Press Enter and then select Unlink Receivers
Unlink Receivers Unlink Receivers
Unlink Receivers
4. Press Enter, Unlink Receivers
Unlink Receivers Unlink Receivers
Unlink Receivers blinks for a few seconds until the display goes back to the previous menu
and then the main menu.