Chroma 19501 Series, Quick Start Manual

Page: 12 / 30

19501 Series Fixture B195000/B195001/B195002 Quick Start Guide
4
A ground wire is required to connect the EMI shielding can and the high
voltage module of the 19501 series partial discharge tester. Please use
the ground wire and shielding can ground screw (M4*8 round head) to fix
them. The location and fixing method are shown in the figure below.
When the high voltage module of the 19501 series partial discharge tester
is installed with the EMI shielding can and B195001 or B195002 fixture,
the B195001/ B195002 fixture ground wire and interlock connecting cable
should pass through the position of circled holes in the following figure for
connection.