16
Assembly Instructions
Before beginning assembly, be sure to observe our recommendat-ions
and safety instruction. Remove all the part of your cycle from the carton
and place them on the floor carefully.
Some parts are pre-assembled.
Step 1:
Attach the stabilizer
1.
Attach the rear stabilizer (8) assembled with 2 rear cross bar caps (9)
and 2 adjustable knob (41) to main frame (1), using 2 allen head bolts
(10), 2 washers (5) and 2 spring washers(6).
You can use adjustable knob (41) to level the bike.
2.
Attach the front stabilizer (2) assembled with 2 front cross bar caps (3)
to main frame (1), using 2 carriages bolts (4), 2 washers (5), 2 spring
washers (6) and two cap nuts (7).
Step 2:
Attach the seat and seat post
1.
Slide the plastic collar (17) to cover the seat post (16).
2.
Insert the seat post (16) to seat post mounting tube of main frame
(1) and secure in position with the seat post quick release (21).
3.
Put the clamp of seat (19) to the seat slide post (18A) and tighten
the seat firmly into your desired position.
4.
After assembling the seat slide post (18) at the seat post with washer
(42) star grip nut (20), you can move the hole of seat slide post to adjust
your desired position.
Step 3:
Attach the front post
1.
Remove the pre-assembled 4 allen head bolt (10), 4 washers (5) and
4 spring washers (6) from main frame(1).
2.
Attach the front post (13) to the front post mounting tube of main
frame (1) and connect the plug of middle section motor cable (14) to
the socket of the motor cable (15).
3.
Insert the front post (13) to main frame (1) and secure, using 4 allen
head bolts (10), 4 spring washers (6) and 4 washers (5).
Summary of Contents for ET 6 VR
Page 3: ...3 Deutsch ...
Page 4: ...4 ...
