19
Step 4:
Attach the handlebar post (4) at mainframe (1).
1. Remove the pre-assembled 6 Allen head bolt (17), 4 washers (19), 2
washers (41) and 6 spring washers (18) from main frame (1).
2. Attach the front post (4) to the front post mounting tube of main frame
(1) and connect the plug of control cable (21) to the socket of the con-
nection cable (22).
3. Insert the front post (4) to mainframe (1) and secure, using 6 Allen head
bolts (17), 6 spring washers (18), 2 washers (41) and 4 washers (19).
Step 5:
Attach the computer (8) at handlebar post (4).
1. Remove the screws (27) to fix the computer from backside of computer
(8).
2. Put in the plug of connection cable (22) into the socket from computers
(8) backside.
3. Attach the computer (8) on top of handlebar post (4) with and tighten
with screws (27). (Attention: Ensure that the cable loom are not crunched
or pinched during installation.)
Step 6:
Attach the handlebar (5) and AC adapter (40).
1. Attach the handlebar (5) to the welded clamp of front post (4) and secure
with clamp first. Then put on the decoration cover (23a) and a washer
and the handlebar grip screw (25) to tighten the handlebar (5) firmly.
Fix the decoration cap (23a) with screw (24).
2. Insert the plug of hand pulse wire (28) to the jack of the computer (8).
Attach the handlebar cover (23b) with screws (24+26).
3. Insert the plug of adaptor (40) to the jack (66) of rear end of chain guard.
4. Then insert the adaptor (40) to a suitable and save installed jack of wall
power (230V~50Hz).
English
Summary of Contents for 1503
Page 4: ...4 ...
