Christie Vive Audio SKA-3D, User Manual

Page: 84 / 118

76 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Web Interface
LFE EQ Tab
C Bi-amp and Phase
Levels Sets the high-frequency (HF) and low-frequency (LF) levels and low-frequency audio
phase. Levels range between 0 and -20 dB and the phase range is between 180° and
-180°. When Link is selected, the high and low frequencies are adjusted at the same
rate.
The Bi-amp L/C/R Configuration must be enabled to use this feature.
D Test Signal Generates a -20 dBFS pink noise test signal.
E High-Pass Filter Sets the high-pass filter frequency in 1 Hz increments between 5 and 150 Hz. Click
Enable to use this feature.
F Save and Load
Settings Saves the current settings to a file, imports external settings to apply, or copies
settings from one channel to another. Click
Copy To , to copy the current EQ settings
to the channel specified in the list. Available options include: Left , Right , Center ,
Left Surround , Right Surround , Left Center , and Right Center . The channels
available for adjustment are dependent on the selected speaker configuration.
Ref. Item Description
A LFE Parametric
EQ Sets the low frequency effects. Click Reset to reset the currently selected audio
channel to the default LFE EQ settings.
• Bandwidth (Band 1 - Band 4) - move the slider to adjust the bandwidth in 5 Hz
increments between 5 and 60 Hz.
• HPF (High-Pass Filter) - select to enable the high-pass filter. Move the slider to
adjust the high-pass filter frequency in 1 Hz increments between 5 and 40 Hz.
• Amplitude (Band 1 - Band 4) - move the slider to adjust the amplitude from
-12 to 12 dB in 0.5 dB increments.
Ref. Item Description