Christie Vive Audio SKA-3D, User Manual

Page: 16 / 118

8 Christie Vive Audio SKA-3D User Manual
020-101056-02 Rev. 1 (10-2013)
Introduction
I Phoenix
connectors (Audio
Out) Accepts single audio channel outputs: L Low, C Low, R Low, Aux 1 LS Low, Aux 2 RS
Low, HI, VI / N. These can be configured using the web interface or serial control
commands.
J Booth Monitor
(Fixed) Accepts an L/R RCA-type cable for the projection booth monitors output. The audio
output level is fixed and is controlled by the external amplification device / monitors.
K AC power inlet Accepts an AC power cord.
L Contact Closure
Inputs (1-8) Accepts Phoenix-type connectors for control of devices using contact closure.
M Relay Outputs
(1-4) Accepts up to four controlled device inputs to these trigger outputs to control
screens, drapes, lights, or other devices. Connect trigger wires to removable terminal
block plugs.
N RS-232 Accepts an RS-232 serial connector to control other devices.
O Ethernet Accepts an Ethernet connection, to connect the A/V Cinema Scaler 3D to a network in
order to use IP control.
P HDMI 1 Accepts an HDMI cable from the source to this HDMI connector.
Q HDMI 3 / DVI-I Accepts a DVI (analog or digital) cable from the source to this DVI connector. This
input also accepts HDMI audio.
R Comp 1 Accepts three Component (YPbPr) video cables from the source to these
RCA-type connectors.
S HDMI L / DVI-D Outputs the left-eye video signal from a 3D source.
T HDMI R / DVI-D Outputs the right-eye video signal from a 3D source.
Ref. Item Description