Christie P35GPS-AT, Operating Instructions Manual

Page: 25 / 85

P 3 5 G P S D u a l L e n s T u r r e t P r o j e c t o r
CHRISTIE DIGITAL SYSTEMS P35GPS Projector 4-4
March, 2004
10. Place film at upper part of Ultramittent in film guide (R).
11. Align film on steel bands of trap and gate assembly (T).
12. Close gate (C
) and lock catch knob (D) in place.
13. Form 1.5-inch loop between upper constant-speed sprocket and gate (C), as shown in
Figure 4-1.
14. Align the film on upper constant-speed sprocket (A) and close film shoe (B).
15. To verify that film is correctly aligned on all sprocket rollers, move turndown knob (N)
clockwise.
•
Framing lamp can be turned “on” or “off” with black rocker switch
located on top of projector.
•
Framing lamp is functional with picture changeover in either
position.
•
If film reel is used, be sure take-up tension is in accordance with reel
manufacturer’s instructions.