The display window changes as you make the adjustments.
4. To define the Video Source for the subarray, select No Video, Global, or Local (default).
5. When the changes are correct, click Apply.
Prioritizing the ECUs in the array
Identify the ECUs in the array as a slave or master.
All ECUs are shipped as slaves from the factory. In a multiple ECU array, one ECU acts as the master
ECU, while all remaining ECUs act as slave ECUs. The master ECU sends configuration information to
all slave ECUs.
When replacing ECUs in the field, ensure at least one ECU is a master. If you have two masters, one of
them must be set as a slave.
1. Select Canvas Management > Layout > ECU Priority.
2. To load the information from the ECUs connected to the array, click Refresh.
3. Select an ECU from the table.
4. Use the Priority scroll bar or the up and down arrow keys to manually set a priority to the ECU.
The priorities are from 0-255 in descending order, where 0 is the highest priority. The master
ECU has the highest priority.
5. Click Apply.
Configuring the IP address of the ECU
Manually update the IP address of an ECU.
1. Select Configuration > Ethernet.
2. Select the ECU.
3. To manually enter an IP address for the ECU, disable DHCP and type the IP Address.
4. Click Apply.
Manually adding tiles to the canvas
When configuring a canvas that includes a group of tiles not physically connected, you must add the
tile to the grid and specify the X and Y coordinates.
Use the rows (y-coordinates) and columns (x-coordinates) of the grid to manually map tiles; the input
image automatically stretches spanning across all manually mapped tiles. The top left is 0,0. Each
array index corresponds to a unique mapping of the input image.
The image on the array is automatically configured and mapped once the tile is dropped into the main
grid. All blue colored tiles indicate they have been manually mapped and non-mapped tiles are gray.
All manually mapped tiles are displayed in the Manually Mapped Tiles table.
Configuring the array
Christie MicroTiles Installation and Setup Guide
34
020-100329-15 Rev. 1 (05-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.
