8
Setup Guide
020-000504-02 Rev. 1 (06-2012)
LX501/LX601i/LW401/LW551i/LWU421/LWU501i
Fastening the cable holder
Use the supplied cable holder to prevent
the USB wireless adapter and the HDMI
TM
cables from becoming detached.
When using the cable holder, connect the
USB wireless adapter to the further
USB
TYPE A
port from the
LAN
port.
1.
Remove the screw marked with a
triangle and the screw marked with a
diamond.
2.
Open the cable holder clip and then
align the screw holes on the projector
and the holder. Then insert the screw
removed from the projector into the hole
and tighten the screw.
3.
Snap the clip closed to secure the
HDMI
TM
cables in place.
Fastening the adapter cover
Use the supplied adapter cover to prevent
the USB wireless adapter from coming
off easily. When using the adapter cover,
connect the USB wireless adapter to the
further
USB TYPE A
port from the
LAN
port.
1.
Loosen the screw marked with a
triangle.
2.
Insert the tab of the cover into the hole
at the upper right of the
USB TYPE A
ports in the
direction of the arrow.
3.
Align the screw holes on the projector and the cover.
Then insert the screw removed from the projector into the hole and tighten
the screw.
WARNING
►Keep small parts away from children and pets. Take care not
to put in the mouth.
2, 3
1
WARNING
►Keep small parts away from children and pets. Take care not
to put in the mouth.
1
3
2
Tab
Cable holder
http://www.pureglare.com.au