manualshive.com logo in svg

Christie LW401, Setup Manual, Page: 22 / 22

Share
Download
Christie LW401 Setup Manual Download Page 22

21

ENGLISH

Setup Guide

020-000504-02 Rev. 1 (06-2012)

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

Troubleshooting - Warranty and after-service

If an abnormal operation (such as smoke, strange odor or excessive sound) 
should occur, stop using the projector immediately. 
Otherwise if a problem occurs with the projector, first refer to “Troubleshooting” of 

User Manual - Operating Guide

, 

Network Guide

 and 

Instant Stack Guide

, and 

run through the suggested checks. 
If this does not resolve the problem, please consult your dealer or service 
company. They will tell you what warranty condition is applied.

Please check the following web address where you may find the latest information 
for this projector.

http://www.christiedigital.com

Trademark acknowledgment

•  Mac

®

, Macintosh

®

 and Mac OS

®

 are registered trademarks of Apple Inc.

•  Pentium

®

 is a registered trademark of Intel Corp.

•  Adobe

®

 and Acrobat

®

, Reader

®

 are registered trademarks of Adobe Systems 

Incorporated.

•  Microsoft

®

, Internet Explorer

®

, Windows

®

, Windows NT

®

 and Windows Vista

®

 

are registered trademarks of Microsoft Corporation in the U.S. and/or other 
countries.

•  HDMI

TM

, the HDMI logo and High-Definition Multimedia Interface are 

trademarks or registered trademarks of HDMI Licensing LLC in the United 
States and other countries.

•  Blu-ray Disc

TM

 and Blu-ray

TM

 are trademarks of Blu-ray Disc Association.

All other trademarks are the properties of their respective owners.

NOTE

  • The information in this manual is subject to change without notice.

• The illustrations shown in this manual are one example for explanation. On 
your projector, there may be some differences from the illustrations.
• The manufacturer assumes no responsibility for any errors that may appear in 
this manual.
• The reproduction, transfer or copy of all or any part of this document is not 
permitted without express written consent.

End User License Agreement for the Projector Software

• Software in the projector consists of the plural number of independent 
software modules and there exist our copyright or/and third party copyrights for 
each of such software modules.
• Be sure to read “End User License Agreement for the Projector Software” 

which is separated document. (in the CD)

http://www.pureglare.com.au

Summary of Contents for LW401























Reviews:

No comments