manualshive.com logo in svg

Christie LW401, Setup Manual, Page: 11 / 22

Share
Download
Christie LW401 Setup Manual Download Page 11

10

Setup Guide

020-000504-02 Rev. 1 (06-2012)

LX501/LX601i/LW401/LW551i/LWU421/LWU501i

Turning on the power

1. 

Make sure that the power cord is firmly and correctly connected to the 
projector and the outlet.

2. 

Make sure that the 

POWER

 indicator is 

lighted in steady orange. Then remove 

the lens cover.

3. 

Press the 

STANDBY/ON

 button on 

the projector or the 

ON

 button on the 

remote control.

The projection lamp will light up and the 

POWER

 indicator will begin blinking in 

green. When the power is completely on, the 
indicator will stop blinking and light in steady 
green.

WARNING

  ►A strong light is emitted when the projector’s power is on. Do 

not look into the lens of the projector or look inside of the projector through any 
of the projector’s openings.

NOTE

  • Please power on the projector prior to the connected devices.

• The projector has the DIRECT POWER ON function, which can make the 
projector automatically turn on. For more information, please see 

User Manual 

- Operating Guide

.

POWER

 indicator

ON

 button

STANDBY/ON

 button

http://www.pureglare.com.au

Summary of Contents for LW401























Reviews:

No comments