Christie LS+700, User Manual

Page: 8 / 34

6
PJLink command
PJLink command
Commands Control Description Parameter or Response
POWR Power Contorol
0 = Standby
1 = Power On
POWR ? Power Status inquiry
0 = Standby
1 = Power On
2 = Cool Down
INPT Input Source selection
11 = COMPUTER IN 1
12 = COMPUTER IN 2
13 = BNC
21 = COMPONENT
22 = S-VIDEO
23 = VIDEO 1
24 = VIDEO 2
31 = HDMI
32 = DVI-D
INPT ? Input Source inquiry
11 = COMPUTER IN 1
12 = COMPUTER IN 2
13 = BNC
21 = COMPONENT
22 = S-VIDEO
23 = VIDEO 1
24 = VIDEO 2
31 = HDMI
32 = DVI-D
AVMT AV Mute
30 = BLANK off
31 = BLANK on
AVMT ? AV Mute inquiry
30 = BLANK off
31 = BLANK on
ERST ? Error Status inquiry
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to 2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected; 1 = Warning; 2 = Error
This projector is equipped with the PJLink
TM
Class 1.
See the following table for the commands for controlling the projector using the
PJLink
TM
protocol are as given in the table below.
Technical Guide
020-000161-01 Rev. 1 (05-2009)
LX750/LW650/LS+700 User Manual