Christie Link, User Manual

Page: 15 / 26

Christie Link input types
Learn about the different input type options.
One-Port
Users can select the input type (DisplayPort or HDMI) for each individual output port. Options include
selecting input one, input two, or multi-stream. In multi-stream mode, both inputs are sent to the
connected projector and the user can select which input stream to run. The videos are not combined.
Two-Port
In Two-Port mode, input one and input two are combined into a single video. Input one is responsible
for the left section of the screen, and input two is responsible for the right section of the screen.
When two-port mode is selected, no options are available for the output modules. It only displays
HDMI 1 & 2 or DisplayPort 1 & 2.
Dual Input 3D
Users are not required to select the inputs to each individual output port. The two input signals are
always combined. Input one is responsible for the left eye and input two is responsible for the right
eye.
When dual input 3D is selected, no options are available for the output modules. It only displays HDMI
1 & 2 or DisplayPort 1 & 2.
Connecting Christie Link to the projector
Configure the connection between Christie Link and the projector.
1. From the projector display panel, select Configuration > Input Settings.
2. Navigate to Input Mode and select HDMI or DP.
DP (DisplayPort) is the default.
3. To save the selection, select Enter.
4. Navigate to Input Type and select One-Port, Two-Port, or Dual-Input 3D.
5. To save the selection, select Enter.
6. Navigate to the Output Devices and select the source.
The input type (One-Port, Two-Port, or Dual-Input 3D) determines the available options.
7. To save the selection, select Enter.
If the projector is connected and detected, only the required source selections are available.
Installation and setup
Christie Link User Guide 15
020-102234-04 Rev. 1 (06-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.