manualshive.com logo in svg

Christie LED012-CP-R, Installation And Setup Manual

Share
Download
Christie LED012-CP-R Installation And Setup Manual Download Page 38

4. Launch the E500 controller software and log in as the administrator.

a) Click User > Advanced User Login.
b) Login with the password admin.

5. In the blank area beside the Monitoring icon, right-click and type 666888.
6. In the Program Path area, browse to the location of the unzipped download, and select the

firmware upgrade folder.

7. Click Update.
8. In the confirmation message, click Yes.

As the firmware upgrade is installed, the controller screen and controller software both display
a progress indicator.
After the upgrade is complete, the controller reboots.

9. To verify the upgrade was successful, in the top left corner of the controller display verify the

version number displayed is 1.0.5.9.

Configuring the E600 controller

Velvet LED Display System Installation and Setup Guide–CorePlus Series (Remote Power)

38

020-102423-01 Rev. 1 (06-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Summary of Contents for LED012-CP-R












































Reviews:

No comments

Brands by name

Popular brands

Load more brands