Christie ICON 1560, Product And Assembly Manual

Page: 7 / 50

ICON Cabinet Product and Assembly Manual 6885_00
7
Specifications
|
• Barbecue facilities should be installed in plain view, where they can be monitored for
safe and appropriate use
• Ensure there are no climbing aids that will allow children access to the cooking surface
• Cabinet doors require a minimum 1000 mm clearance when opened
• Ensure there is at least 1200 mm clearance above barbecue cooking surfaces
• Due to the nature of this product, it requires clear access to all sides. The recommended
minimum slab size is 900 mm larger than the cabinet benchtop on all sides
• Recommended slab thickness is 100 mm
• When designing for access and mobility in Australia and New Zealand, please refer to the
Australian Standard, AS 1428 (Design for access and mobility)
Christie ICON Series barbecue cabinets are manufactured entirely from stainless steel for
ultimate durability and corrosion resistance.
ICON cabinets are available in #4 brushed stainless steel finish, or powder coated in an
extensive range of powder coating colours. The product is designed to allow for several
configurations and combinations of sinks and cooktops.
Note: All illustrations and instructions apply only to standard cabinets. Some assembly and
parts supplied for custom configurations may vary from what is specified in this manual.
2.1 Siting Guidelines
2.2 Tools required
2.3 Specifications
• 10 mm Spanner
• Masonry drill with 8 mm masonry drill bit
• Masonry anchors to suit 8 mm diameter
hole (a minimum of 4 anchors required
for all cabinets)
• Spanner to suit masonry anchors
Important:
Do not use an impact driver.