Christie ICON 1560, Product And Assembly Manual

Page: 45 / 50

ICON Cabinet Product and Assembly Manual 6885_00
45
6.4 Cleaning waste containers
Waste container
Our optional waste container is suitable for locations where grill plates are not subject to water
ingress. Water ingress can be prevented by providing shelter over the barbecues or fitting a
Christie barbecue hood to the cooktop.
We sell each waste container with a starter pack of 25 bags. Replacement bags are available
for purchase in packs of 100.
1. Inserted the specially designed, heavy duty plastic bag into the container. Fold the
bag down over the outside of the container
2. Pour approximately 20mm of water into bag before first use
3. When emptying, lift the bag out of the container. Skim the oils off the water.
Place the oils in a suitable receptacle and dispose of it in accordance with local
regulations. Dispose of the remaining contaminated water into a sewerage or other
approved disposal system
1. Before use, fill the grease trap with water to approximately 50 mm above the bottom
of the internal partition to ensure that fat, grease and oil will be separated from water
2. Place grease trap inside barbecue cabinet, underneath the grill plate. Align so that the
main chamber of the grease trap is directly under the drain tube
3. When emptying, skim the layer of oils and fats off the water. Place the fat in a suitable
receptacle and dispose of it in accordance with local regulations. Dispose of the
remaining contaminated water into a sewerage or other approved disposal system
4. Clean and wash the grease trap with a mild detergent or pH-neutral, biodegradable
degreaser, before replacing it inside barbecue surround. A high-pressure cleaner or
steam cleaner may also be used. Extra grease traps can be ordered from Christie, to
exchange and clean grease traps thoroughly off site
Grease trap: Fill with until the water is above the bottom of the partition
Waste container: Insert the plastic bag into the container and add approximately
1 cup of water
Cleaning and maintenance
|