Christie ICON 1560, Product And Assembly Manual

Page: 30 / 50

ICON Series Cabinet Standard and Large
30 |
Large cabinet assembly and installation
STEP 2
Assemble the cabinet in the desired final location. Ensure the panels are
placed in the correct positions before fixing.
1. Locate and unpack the two side panels, foot panels, rear panel, and centre strut.
2. Remove the in-fill panels from each side panel and set these aside.
3. Connect the foot panels together. Secure using (3) x M6 bolts and nuts.
4. Assemble the foot panels, centre strut and side panels. Secure using (4) x M6 bolts
and (2) x M6 nuts.
5. Install the rear panel between the two side panels and over the centre strut. Secure
using (10) x M6 bolts and (2) x M6 nuts.
Note: Brushed stainless steel cabinets will have a protective film on the outer surface.
Peel back the film from internal and adjoining surfaces before assembly.
FIG. 23