Setting Advanced features
Christie E510 LED Display Controller User Guide
30
020-001941-01 Rev. 1 (07-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
The E510 supports a low latency of less than 1 ms (when the start position of image is 0). Low latency is used to
reduce the time delay between the input of video signal to the controller and the corresponding output.
1.
On the Home screen, press the knob to enter the menu.
2.
Select Advanced Settings and press the knob to enter its submenu Low Latency.
3.
Set the horizontal resolution loaded by a single Ethernet port to less than or equal to 512 pixels.
Low latency cannot be enabled with any of the following functions at the same time.
•
Image mirroring
•
Input of interlaced SDI video sources
•
GENLOCK
Each Ethernet port must load the cabinets vertically in the configured screen, as shown in the figure below.