Setting Advanced features
Christie E510 LED Display Controller User Guide
28
020-001941-01 Rev. 1 (07-2021)
Copyright
©
2021 Christie Digital Systems USA, Inc. All rights reserved.
1.
On the Home screen, press the knob to enter the menu.
2.
Select Advanced Settings and press the knob to enter its submenu Alarm Threshold.
3.
Set the threshold.
When no temperature or voltage alarms exist, the Home screen displays the backup status.
When a threshold is exceeded, its corresponding icon is flashing, instead of displaying the value.
Icon
State
Range
Voltage alarm, icon flashing
3.5 V
–
7.5 V
Temperature alarm, icon flashing
-20°C to 85°C (-4°F to 185°F)
Voltage and temperature alarms at the same time, icon flashing
—
Adjust the color of parameters of the output image on the LED screen.
1.
On the Home screen, press the knob to enter the menu.
2.
Select Advanced Settings and press the knob to enter its submenu Image Settings.
3.
Adjust the image settings.
Parameter
Range
Stepping
Color temperature
4000 K to 500 K
100
Red/Green/Blue
0 to 255
1
Gamma
1.0 to 4.0
0.1
Contrast
0% to 100%
1
Saturation
0% to 100%
1
Hue
-180 to 180
1
By using this function, you can:
1.
On the Home screen, press the knob to enter the menu.
2.
Select Advanced Settings and press the knob to enter its submenu Save to RV Card.
3.
Set the following:
•
Send and save the configuration information to the receiving cards, including brightness, color
temperature, Gamma and display settings.
•
Overwrite the information saved to the receiving card earlier.