Christie DWU1082-GS, User Manual

Page: 44 / 80

GS Series DWU1082-GS User Manual 44
020-001800-01 Rev. 1 (04-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
Operation
Input Switching & PIP menu
The Input Switching & PIP menu determines how the main and PIP/PBP inputs are handled.
Menu item Description Options
Main Input Selects an active input to be used as the main
image. —
PIP/PBP Input Selects an active input to be used as the PIP/
PBP. —
PIP/PBP Enable Toggles between displaying two sources at
once (main and PIP/PBP images) or one
source only.
Refer to
Inputs on page 53 and on page 57.
• Selected checkbox—Turns the PIP/PBP
source on
.
• Cleared checkbox—Turns the PIP/PBP source
off.
Swap Changes the main image to PIP/PBP, and the
PIP/PBP to main image.
Swapping is available only when PIP/PBP is
enabled. —
Size Selects the PIP/PBP size to small, medium, or
large. —
Main Layout Sets the location of the PIP/PBP image on the
screen. —
Timing Detection
Mode Sets timing detection mode to wide or normal
to support additional PC timings. When the
projected picture is not completed, this
function is used to adjust the picture.
For 4:3 input sources not recognized by Wide
mode (for example 1400 x 1050), perform
Auto Image using Normal mode. • Normal mode—Supports 4:3 input sources.
• Wide mode—Supports the 16:9 input source
and most 4:3 input sources.
Source Info Displays the current source settings. (Read-
only) —
Input key Lists or changes the sources. —
Input Switching & PIP
VGA
1. Main Input
HDMI1
2. PIP/PBP Input
Medium
5. Size
Top Right 6. Main Layout
Auto Source
7. Timing Detection Mode
3. PIP/PBP Enable
4. Swap
8. Source Info
9. Input Key
10. Blank on Signal Switch