Section 5: Parts and Module Replacement
D4K25 Service Manual
5-5
020-100880-01 Rev. 1 (06-2012)
5.4
Removing Projector Covers
Never operate the projector or the fans without all the covers installed.
5.4.1 Shroud
Remove the shroud as follows:
1. Using finger pressure, push down on the locations
specified (Red Arrows). See
Figure 5-1.
1. Carefully slide the shroud sideways and forward away
from the lens.
1. Place the shroud covers on a clean service to prevent
scratches.
5.4.2 Front Top Lid
(Estimated Replacement Time: 2 minutes)
Remove the top lid to gain access to the light engine
and liquid cooling system compartments.
1. Unlock front top lid using the low security key
2. Lift the lid up and remove.
Figure 5-1 Shroud Removal
Figure 5-2 Front Top Lid
