LOE–Video Loop Out Enable
Enables or disables video loop out on the THIC, 3GIC, and TDPIC cards.
Commands
Command
Description
Values
LOE <0 | 1>
Enables or disables video loop out. This
command is only available if video
electronics are on and it only applies to
option cards that have loop out. (Saved
value)
0 = Disables video loop out
1 = Enables video loop out (Default)
LPP–Light Output Power
Adjust the amount of light output and/or the native color balance.
Commands
Command
Description
Values
LPP <percentage>
Sets the amount of light output as a percentage of
maximum power.
500 to 1000
1000 (Default)
LPP+BLUA <percentage>
Adjusts the color balance by subtracting blue light
output.
-300 to 0
0 (Default)
LPP+GRNA <percentage>
Adjusts the color balance by subtracting green (and
some red) light output.
-300 to 0
0 (Default)
LPP+REDA <percentage>
Adjusts the color balance by subtracting red light
output.
-300 to 0
0 (Default)
LPP+RSET
Resets the light output settings to default settings.
—
Examples
Set the light output to 90.5%:
(LPP 905)
Adjust the color balance by subtracting 10.0% red and 5.0% blue light:
(LPP+REDA -100)
(LPP+GRNA 0)
(LPP+REDA -50)
Serial API commands
Crimson and Crimson Mirage Technical Reference–Serial Commands
38
020-102660-01 Rev. 1 (07-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.