Command
Description
Values
19 = FLIR
20 = Focus Fidelity
21 = Boresight
22 = Convergence
23 = Integrator Rod
24 = Flare
ITP+FREQ <value>
Sets the frequency at which the internal test patterns
are displayed.
This command is only available if video electronics are
on.
24 to 500
60 (Default)
ITP+GRDC <0 | 1>
Enables multi-color or white-on-black grids for the
Square Grid or Diagonal Grid test patterns.
This command is only available if video electronics are
on.
0 = White-on-black
1 = Multi-color (Default)
ITP+GRDM <0 | 1>
Enables moving or static grid for the Square Grid or
Diagonal Grid test patterns.
This command is only available if video electronics are
on.
0 = Static (Default)
1 = Moving
ITP+GRDP <pitch>
Defines the spacing between lines used for the Square
Grid and Diagonal Grid test patterns.
This command is only available if video electronics are
on.
2 to 127
32 (Default)
ITP+GREY <grey
level>
Defines the shade of grey for the Flat Grey test pattern.
This command is only available if video electronics are
on.
0 to 4095
2048 (Default)
ITP+RMPL <grey
level>
Defines the starting (top/left) grey-level used for the
Horizontal Ramp, Vertical Ramp, and Diagonal Ramp
test patterns.
This setting has no effect when the ramp is moving
(such as ITP+RMPM is non-zero).
This command is only available if video electronics are
on.
0 to 4095
0 (Default)
ITP+RMPM <speed>
Defines the motion speed used for the Horizontal Ramp,
Vertical Ramp, and Diagonal Ramp test patterns.
This command is only available if video electronics are
on.
0 to 100
0 (Default)
ITP+RMPS <slope>
Defines the slope used for the Horizontal Ramp, Vertical
Ramp, and Diagonal Ramp test patterns.
This command is only available if video electronics are
on.
1 to 5
1 (Default)
Serial API commands
Crimson and Crimson Mirage Technical Reference–Serial Commands
33
020-102660-01 Rev. 1 (07-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.