Safety precautions
Learn about the safety precautions related to the Christie CP2420-Xe/CP4420-Xe projector.Learn about
the safety precautions related to the Christie CP2420-Xe/CP4420-Xe projectors.. This projector is
intended for use in a cinema environment.
General safety precautions
Read all safety and warning guidelines before installing or operating the projector.
Warning! If not avoided, the following could result in death or serious injury.
•
TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
•
This product must be installed within a restricted access location not accessible by the general
public.
•
Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
•
Install the product so users and the audience cannot enter the restricted area at eye level.
•
ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
•
High leakage current present when connected to IT power systems.
•
FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
•
FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
•
A minimum of four people or appropriately rated lift equipment is required to safely lift, install,
or move the product.
•
Do not install or operate the projector in any position that does not meet the stated product
specifications for alignment and orientation.
Caution! If not avoided, the following could result in minor or moderate injury.
•
Only Christie qualified technicians are permitted to open product enclosures.
Introduction
CP2420-Xe and CP4420-Xe Installation and Setup Guide
6
020-103555-01 Rev. 1 (03-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
