4. To loosen the three setscrews (B) on the lens mount, use a 5 mm hex driver.
The setscrews must be backed out several turns to avoid contact with the inner lens mount
plate.
5. To fine tune the focus of cross-hair pattern I, adjust the appropriate adjustment screw (A)
until the cross-hair image is in focus with minimal flare.
Adjusting the image
CP2320-RGB Installation and Setup Guide
40
020-102773-02 Rev. 1 (05-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
Summary of Contents for CP2320-RGB
Page 1: ...Installation and Setup Guide 020 102773 02 CP2320 RGB...
Page 47: ......
