Christie CP2320-RGB, Installation And Setup Manual

Page: 25 / 47

Mode Description
Projector on
• CineLife
™
electronics and light engine are on
• Laser optical sub-system (LOS) and thermo-electric cooler (TEC) devices are off
Light source on
• CineLife
™
electronics and light engine are on
• LOS and TEC are on
• Fans run at full speed
Standby
• CineLife
™
electronics remain on standby with the light engine off
• LOS and TEC are off
• Fans run at reduced speed
Turning the projector on or off
Turn on the projector to display content, or turn off the projector to conserve energy.
To operate the projector, the circuit breakers must be in the ON position. If you are servicing the
projector or removing the protective covers, ensure that the MAIN and UPS circuit breakers are in the off
position.
• In the right toolbar, tap and hold Power.
If the light source is on when turning off the projector, the light source enters a ten-minute
cool-down period automatically.
Logging on to the projector
Log on to the projector to access projector menus.
1. Tap Login.
2. In the User list, select a user name.
3. Enter your password.
4. Tap Login.
Turning the light source on or off
Turn the light source on to display content or view test patterns, turn the light off to extend the life of
the lasers.
• To turn the light source on or off, in the right toolbar, tap and hold Light.
If you turn on the light source when the projector power is off, power is turned on
automatically.
Allow the projector to cool down for 10 minutes after turning it off.
Installing and setting up
CP2320-RGB Installation and Setup Guide 25
020-102773-02 Rev. 1 (05-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.