Christie Christie LX66A User Manual Download Page 59

Page: 59 / 84

Image Adjustment

Move the pointer to one of the followings with the Point
buttons (

, and

) or the Control pad and press the

SELECT button.

LIST.............displays Color Management List window to store

the adjustment data.

COLOR.M ..returns to the previous image with the Color

management pointer.

MENU .........displays a confirmation dialog box. Select [Yes] to

return to the menu display.

Color management list

After selecting LIST on the Color selection window, Color
Management List will appear. Move the pointer to one of the
followings with the Point buttons (

,and

) or the

Control pad and press the SELECT button.

ALL DEL......deletes all the data on the list.
MENU .........displays a confirmation dialog box. Select [Yes] to

return to the menu display.

COLOR M...returns to the previous image with the Color

management pointer.

Press the CANCEL button to exit the Color management mode.

M o v e   t h e   p o i n t e r
t o   t h e   s e l e c t e d
color and press the
SELECT button.
T h e   c o n f i r m a t i o n
dialog box appears.

Color management list

Clear the check mark with the
SELECT button not to apply
the adjusted color to the
projected image.

Soften or sharpen the image with the Point buttons (

and

) or

the Control pad. (From 0 to 15.)

Sharpness

Lighten or deepen green tone of the picture with the Point
buttons (

and

) or the Control pad. (From 0 to 63.)

Green

Lighten or deepen blue tone of the picture with the Point buttons
(

and

) or the Control pad. (From 0 to 63.)

Blue

Auto picture control

With this function enabled, the projected image will be easier to
see by emphasizing black of the picture. Select one from the
following settings:

Off

disabled

emphasizes black of the picture.

emphasizes black of the picture greater than L1.

Lighten or deepen red tone of the picture with the Point buttons
(

and

) or the Control pad. (From 0 to 63.)

Red

Color temp.

Select a level from among XLow, Low, Mid and High with the
Point buttons (

and

) or the Control pad and the SELECT

button.

Select [Yes] to
return to the
menu display.

The setting selected.

Note:

Downloaded From projector-manual.com Christie Manuals

Reset all adjustments to their previous figures.

Exits Image Adjust menu.

To store the adjustment data, move an yellow frame pointer to
Store and press the SELECT button. Image Level Menu will
appear. Move the yellow frame pointer to one of Image 1~10
and then press the SELECT button.

With this function On , interlaced video signal is displayed in a
progressive picture.

Progressive

This function is effective on 2:3 or 2:2 pulldown video sources.
With this function On , the projector reproduces pictures
faithful to the original film quality.

Film

Note:

Store

Image Level Menu

Move the yellow frame pointer to
a n i m a g e a n d t h e n p r e s s t h e
SELECT button.The confirmation
box appears.
Select [Yes] to store the image
adjusted.

Select one of the followings to reduce noise of the image.

Off  . . . .disabled
L1  . . . . .Select  L1  for an active picture.
L2  . . . . .Select  L2  for a still picture.

Noise reduction

Image Adjustment

Adjust with the Point buttons (

and

) or the Control pad to

obtain better balance of contrast. (From 0 to 15.)

Gamma

Store

Reset

Quit

Downloaded From projector-manual.com Christie Manuals

Scr
een Setting

Provides image to fit the horizontal size of the screen size.
When the input signal is SXGA (5:4), the image is fully displayed
at 4:3 aspect ratio.

Full screen

Adjusts aspect (scale and position) of the screen. Press the
SELECT button at Custom. Custom will be displayed on the top
left of the screen for four (4) seconds and then return to the
previous menu display. Press the SELECT button again with the
pointer stayed on Custom to display Aspect setting menu. Adjust
each value of Scale and Position.

Scale . . . . .adjusts horizontal and vertical scale of the screen.

(From 32 to +32)

H&V . . . . .changes Vertical value subject to Horizontal value;

when a checkmark is put on H&V, Scale V cannot
be adjusted.

Position . .adjusts horizontal and vertical position of the

screen. (From 15 to +15)

Common . .applies the current Aspect setting to all the Inputs.

Reset . . . . .resets all adjusted values to zero.

Quit . . . . . .exits the Aspect setting menu.

Screen Setting Menu

Wide

Provides image to fit screen size.

Normal

True

Custom (Aspect)

Provides image in its original size. When the original image size is
larger than the screen size, this projector enters panning mode
automatically. While True is displayed on screen, pan the
image with the Point buttons (

, and

) or the Control

pad. Digital zoom + and mode can be switched by pressing the
SELECT button.

Provides image to fit wide video aspect ratio (16:9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16:9.

selects the screen size from Normal, Wide, True, and Full screen;
customizes it by Scale, H&V, Position, Common, and Reset; adjusts it by
Digital zoom +/ , Keystone; sets Ceiling and Rear.

Screen

Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons (

and

) or the Control

pad and press the SELECT button when the SCREEN
SETTING icon comes right in front.

Move the yellow frame pointer with the Point buttons (

and

) or the Control pad to an item which you want to

select.

Screen (Custom: H&V)

Screen Setting

Screen (Custom)

Item data

Adjust value with
the Point buttons

(

and

)

or the

Control pad.

Screen (Custom: Common)

Screen Setting

icon

Aspect Setting Menu

Move the pointer to an item to set and
adjust value with the Point buttons

(

and

)

or the Control pad.

Pointer

Checkmark

Move the pointer to Common and press
the SELECT button. The confirmation
box appears. Select [Yes] to activate it.

Pointer

Note:

Screen Setting

Downloaded From projector-manual.com Christie Manuals

Press the SELECT button at the D. Zoom . The message D.
Zoom

is displayed. Press the SELECT button to compress the

image size.

D. Zoom

Ceiling

Rear

When this function is On, the picture is top/bottom and left/right
reversed. This function is used to project the image from a ceiling
mounting the projector.

When this function is On, the picture is left/right reversed. This
function is used to project the image to a rear projection screen.

Press the SELECT button at the D. Zoom +. The message D.
Zoom + is displayed. Press the SELECT button to expand the
image size. And use the Point buttons (

, and

) or the

Control pad to pan the image. The Panning function can work
only when the image is larger than the screen size.

D. Zoom +

Ceiling

Rear

Note:

D. Zoom

This function corrects distortion of a projected image. Press the
SELECT button at Keystone and the keystone dialog box appears.
Adjust keystone with the Point buttons (

, and

) or the

Control pad.

Press the Point

button or the Control pad at Keystone and

select either Store or Reset with the Point buttons (

and

) or

the Control pad, and then press the SELECT button to fix the
selection.

Store . . . .stores the keystone adjustment even if the AC

power cord is disconnected.

Reset . . . . .resets the keystone adjustment when the AC power

cord is disconnected.

Keystone

Note:

Screen Setting

Downloaded From projector-manual.com Christie Manuals

Menu

Setting

Language

The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean, or Japanese.

This feature allows you to change the On-Screen Menu setting.

Position

When Position is selected, arrows appear in upward, downward,
right and left directions on the screen. Move the menu position
with the Point buttons (

, and

) or the Control pad and

fix it by pressing the SELECT button.

My menu

This feature enables you to customize the On-Screen menu
display. Put checkmarks on items of each menu that you want
to display.

Simple menu

On . . . . . . .When adjusting value in the Image adjust menu, the

value adjustment bar is displayed on the bottom left
of the screen.

Off . . . . . . .Default setting.

Setting Menu (Language)

changes various settings: Language, Menu, Logo, Background, Lamp,
Remote control, Display, Input search, Power management, On start, Analog
out, Lens memory, Shutter, Security, and Factory default.

Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons (

and

) or the Control

pad and press the SELECT button when the SETTING icon
comes right in front.

Move the yellow frame pointer with the Point buttons (

and

) or the Control pad to an item which you want to set

and then press the SELECT button. The Setting dialog box
appears.

Menu Position

Setting icon

Language Menu

Note:

My Menu

Checkmark

Move the pointer to an item to be
displayed and put a checkmark on
the item by pressing the SELECT
button.

Pointer

Setting

Downloaded From projector-manual.com Christie Manuals

Setting

Logo

Logo settings can be altered as follows:

Logo select

This function decides what to be displayed on the starting-up
display as follows:
Default  . . . .the factory-set logo
My logo  . . .the image you captured
Off  . . . . . . .count-down only

Capture

This function enables you to capture the image being projected
and use it for a starting-up display or interval of presentations.
After capturing the projected image, go to the Logo function and
set it to My logo . Then the captured image can be displayed
when turning on the projector next time. (p27)
To capture the image, select [Yes]. To cancel the Capture
function, select [No].

Note:

Logo Lock Setting

Lock

This function prevents an unauthorized person from changing the
Logo setting.

Off . . . . .the Logo setting can be changed freely from the

Logo menu.

On . . . . . .the Logo setting cannot be changed without PIN

code.

If you want to change the Logo Lock setting, enter a PIN code
along the following steps. The initial PIN code for Logo Lock
setting is set 4321 at the factory.

Select [Yes]
to capture the
p r o j e c t e d
image.

Select [Yes] to
stop capturing.

Capture

Logo Select

Enter a Logo PIN code

Select a number with the Point buttons (

, and

) or the

Control pad and fix the number with the SELECT button. The
number will change to

. If you fixed a wrong number, move

the pointer to C with the Point buttons (

, and

) or

the Control pad, then enter the correct number.

Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, move the pointer to Ent .
Press the SELECT button so that you can change the Logo
Lock setting.

If you entered a wrong Logo PIN code, Logo PIN code and
the number (

) will turn red and disappear. Enter a Logo

PIN code all over again.

Enter a Logo PIN code

The input numbers
change to

for

security.

Downloaded From projector-manual.com Christie Manuals

Setting

PIN Code Change

Logo PIN code can be changed to your desired four-digit number.
Select PIN code change with the Point buttons (

, and

) or the Control pad and press the SELECT button. Set a new

Logo PIN code.

Be sure to note the new Logo PIN code and keep it at hand. If
you lost the number, you could no longer change the Logo PIN
code setting. For details on PIN code setting, refer to relevant
instructions of the PJ Lock function on page 55.

Background

Three background settings are available in this projector. Select
one of the followings when no input source is connected to the
projector or no input signal is coming from the connected
equipment:

Blue  . . . . . .blue colored background
My logo  . . .the image you captured
Black  . . . . .black colored background

Lamp

Control

This feature allows you to change brightness of the screen.

Normal . .normal brightness

Auto . . . .brightness according with the input signal

Eco . . . .lower brightness reduces the lamp power

consumption and extends the lamp life.

Mode

This projector is equipped with two lamps. Mode setting allows
you to switch using one (1) lamp or two (2) lamps.
2-Lamp . . . .light both of the lamps inside the projector.
1-Lamp . . . .light one lamp only. Auto, Lamp 1, or Lamp 2 can be

altered.

PIN Code change Dialog Box

Pointer

Select PIN code change and
press the SELECT button.
The PIN code input dialog
box will appear.

Lamp Control

Note:

Setting

Lamp Mode

When selecting Auto in 1-Lamp
mode, the projector automatically
selects either lamp of which the
total Lamp time is shorter and
lights it up.

Remote control

Four (4) remote control channels and eight (8) remote control ID
are prepared for the projector to prevent radio frequency
interference from the other equipment and mutual interference
between projectors when using them at the same time.
For example, operating the projector in CH-2 and ID-7, both the
projector and the remote control must be switched to CH-2 and
ID-7.

To change CH and ID for the projector;

Select a Remote control CH and ID in this Setting menu.

To change CH and ID for the remote control;

While holding down the CH or ID button and press the SELECT
button. The Remote control CH or ID switches sequentially for
one pressing the SELECT button. Changing CH and ID should be
done separately. (See page 16 and 17 for details.)

Remote control

When pressing the SELECT button at Remote control,
the remote control CH and ID menu appears. Select CH
and ID respectively.

The setting
selected.

Pointer

Downloaded From projector-manual.com Christie Manuals

On start

When this function is On, the projector is automatically turned
on just by switching MAIN ON/OFF SWITCH on.

Note:

Setting

Display

This function decides whether to display On-Screen Displays.

On . . . . .shows all the On-Screen Displays.
Off . . . . .sets On-Screen Displays disappeared except;

On-Screen Menu

Power off? message

P-TIMER

No signal  message
Please wait...  message
Searching...  message

Input search

With this function On , the projector automatically starts input
signal search from Input 1 to Input 5 when turning on the
projector. This automatic search stops at the Input where the
projector detects any input signal connected.

Power management

Time left until Lamp off

Press the SELECT button at
Power management and this
box appears. Choose Off to
disable the timer setting,

Ready or Shutdown to

enable the timer setting.

Power management

For reducing power consumption as well as maintaining the lamp
life, the Power Management function starts the count down when
the input signal is interrupted and no button is pressed for 30
seconds or more.

If the input signal is interrupted and no button is pressed for 30
seconds or more, the timer display with the message No signal
appears on the screen. The count-down of the set time gets
started. The count-down time can be set between 1 and 60
minutes.

When the count-down time has been elapsed, the lamp is turned
off to cool itself down. The LAMP indicator dims during this
cooling-off period. The next operation depends on the setting as
follows :

Ready . . . . . .When the lamp has been fully cooled down, the

READY indicator changes to green blinking. In
this condition, the projection lamp is turned on if
the input signal is reconnected or any button on
the top control or remote control unit is pressed.

Shut down . . .When the lamp has been fully cooled down, the

power is turned off.

Off . . . . . . . . .The Power Management function is canceled.

Timer Setting

Move the pointer to the
timer and set time with the
Point buttons

(

and

)

the Control pad and press
the SELECT button. The
timer window disappears
and then choose Ready or

Shutdown to enable the

timer setting.

Note:

Downloaded From projector-manual.com Christie Manuals

Setting

Analog out

The ANALOG OUT terminal is for output of the analog signal
coming from the ANALOG IN terminal in the Input 1 terminals.
(See page 12.)
Select On to enable the signal output through the ANALOG
OUT terminal always except in the stand-by mode or Off to
disable the signal output.

Analog out is not available when selecting the other Inputs except
Input 1. Select Input 1 so that Analog out will be available. (p30,
36)

Lens memory

Lens memory feature enables you to store the lens shift, zoom
and focus adjustment for each Input. When selecting Lens
memory, Input 1~5 will be displayed. Move the pointer to an Input
and press the SELECT button. Choose one of the following
settings for the Input.

Off . . . . . . . . applies the lens shift, zoom and focus adjusted

last.

Memory . . . . stores the lens shift, zoom and focus currently

adjusted for each input. When switching to the
input with Memory selected, the lens moves
to the stored position.

Lens memory

Shutter function is available to block out light to the screen, so that
the screen can be used for the other presenters. In addition, this
function enhances the effectiveness of contrast by 80% opening
up the shutter inside the projector.
Each setting for the Shutter function can be altered as follows:

Level

Sets up shutter level when closing the mechanical shutter.

Normal . . . . . . . . . .0% light blocking
High contrast . . . . .20% light blocking

Protection

Prohibits the shutter operation from the remote control and the
projecto s top control.

Remote control . . Selecting On prohibits the shutter

operation from the remote control.

Projector . . . . . . Selecting On prohibits the shutter

operation from the top control.

It is possible to prohibit the shutter operation from both of the
remote control and the top control.

Shutter

Shutter level

Shutter protection

Setting

Select [Yes]
to activate the
setting.

Press the SELECT button at
Lens memory and choose an
Input for which you want to
store the lens shift, zoom and
focus adjustment and then
select Memory for the input.

When pressing the SELECT button at Shutter, the
Shutter setting menu appears. Select Protection and
then a desired setting for Remote control and Projector.

Note:

Downloaded From projector-manual.com Christie Manuals

Setting

Security

Key lock

This function locks operation from the top control and remote
control. It is used to prevent the projector from being operated
by an unauthorized person.
Projector . . . . . . .locks operation from the top control. To

unlock, use the remote control.

Remote control . .locks operation from the remote control. To

unlock, use the top control.

Off . . . . . . . . . . .unlock any operation. To release lock, select

this.

If the top control accidentally becomes locked and you do not
have the remote control nearby, disconnect the AC power cord
from the AC outlet, and then by hold down the SELECT button
and reinsert the AC power cord. This will cancel the top control
lock.

Key lock

Shutter Management

The Shutter Management function turns off the projection lamp
when the projector is left with the shutter closed and the set
time has passed away. The count-down time can be set between
5 and 180 minutes.

After the count-down time has elapsed, the shutter is opened up
automatically and the lamp is turned off to cool itself down. The
SHUTTER indicator is blinking blue during this cooling-off period.
When the lamp has been fully cooled down, the READY indicator
turns green lighting and the SHUTTER indicator keeps blinking.
Should the POWER button be pressed in this condition, the
projection lamp is turned on and the SHUTTER indicator turns
off.

Shutter Management

USB lock

This function prevents the projector from being operated by an
unauthorized person with the optional USB key and provides the
following settings for security options.

Setting . . . . . .key lock setting (On1, On2, and Off)
Registration . .registers 2nd USB key into the projector. (First

key can be registered by just being connected to
the projector in turning on.)

Delete . . . . . . .deletes the registered USB keys.

To set the USB lock, the optional USB key is required. Refer to
page 73 for the optional USB key and contact the sales dealer
for purchasing. Refer to the owner s manual enclosed with the
USB key for detail operation of the USB lock.

USB lock

Note:

Select Management and set the timer between 5 and
180 minutes.

The setting selected.

Note:

Downloaded From projector-manual.com Christie Manuals

Setting

The PIN code can be changed to your desired four-digit
number.
Select PJ PIN code change with the Point buttons (

and

)

or the Control pad, and press the SELECT button. The PIN code
input dialog box appears. Enter a current PIN code, and then a
new PIN code as follows:

Select a number with the Point buttons (

, and

) or the

Control pad and fix the number with the SELECT button.
Repeat it to complete entering a four-digit number. When the
four-digit number is fixed, move the pointer to Ent. Then
press the SELECT button.

To Change PJ PIN Code

Select Off, On1, or On2 with the Point buttons (

and

) or

the Control pad and then press the SELECT button.

To Change the PJ PIN Code setting

CAUTION:
WHEN YOU HAVE CHANGED PIN CODE, WRITE DOWN
THE NEW PIN CODE IN COLUMN OF THE PIN CODE NO.
MEMO ON PAGE 79, AND KEEP IT SECURELY. SHOULD
THE PIN CODE BE LOST OR FORGOTTEN, THE
PROJECTOR CAN NO LONGER BE OPERATED.

Enter a PIN code

Enter a PJ PIN code

Select a number with using the Point buttons (

, and

)

or the Control pad and fix the number with the SELECT button.
The number changes to

. If you fixed a wrong number,

move the pointer to C once with the Point buttons (

and

) or the Control pad to clear the number. Enter the correct

number.
Repeat this step to complete entering a four-digit number.

When the four-digit number is fixed, move to Ent. Press the
SELECT button so that you can change the following PIN code
lock settings.

If you entered a wrong PIN code, the number (

) turns red

and disappear. Enter a PIN code all over again.

Change the PIN code

Select PJ PIN code change and
press the SELECT button. The PIN
code input dialog box appears.

Select a desired
setting with the
Point buttons

(

and

)

or the

Control pad and
press the SELECT
button.

Change the PJ Lock setting

The input numbers
change to

for

security.

PJ lock

This function prevents the projector from being operated by an
unauthorized person and provides the following settings for
security options.

On1 . . . . . .requires to enter the PIN code every time turning on

the projector.

On2 . . . .requires to enter the PIN code to operate the

projector once the power cord is disconnected; as
long as the AC power cord is connected, the
projector can be operated without the PIN code.

Off . . . . .the projector is unlocked with the PIN code. To

release PJ lock, select this setting.

Whenever to change the PIN code (the four-digit number), you
are required to enter the PIN code. 1234 is set as the initial
PIN code at the factory.

PJ lock

When the projector is
locked with the PIN
code, the PJ lock mark
appears at top left of
the Main menu.

Setting

Pointer

The setting selected.

Downloaded From projector-manual.com Christie Manuals

Setting

Factory default

This function returns all setting values to the factory default
settings except for those including: User logo, PJ PIN code, Logo
PIN code, Security setting, Lamp time, Filter time, and PJ time.

Select Factory default and
this box appears. Select
[Yes], and the next box
appears.

Factory default

Quit

Exits the Setting menu.

Select [Yes]
to activate it.

Downloaded From projector-manual.com Christie Manuals

Special

customizes control functions: Lamp, Fan control, Filter, Auto PC adj., Test pattern, RS-
232C, and USB memory and displays Warning log.

Note:

Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons(

, and

) or

Control pad and press the SELECT button when the
SPECIAL icon comes right in front.

Move the yellow frame pointer with the Point buttons (

and

) or Control pad to an item which you want to select

and then press the SELECT button. The corresponding dialog
box for the item appears.

Lamp

This feature displays the total time of the lamps being used.
Select Lamp 1 or Lamp 2 to show each lamp wattage and time.

To reset the Lamp time, move the pointer to Reset and then
press the SELECT button. The message Lamp time reset? is
displayed. Move the pointer to [Yes] and then press the SELECT
button.

Move the pointer to Reset
and then press the SELECT
button. The message

Lamp time reset? is

displayed. Select [Yes] and
the confirmation box
appears.

Special Menu (Lamp)

Fan control

This function provides you the following alternatives for the
cooling fans operation of the projector and the Option box (Smoke
Resist Box ) separately provided. See page 73 for the Option box.

Normal . . .normal operation
Max . . . . . .faster operation than Normal

Select Normal for usual operation and Max to enhance the
cooling effect.

Filter

This feature displays total time of the filter on the projector and
the Option box (Smoke Resist Box) being used.

To reset the Filter time, move the pointer to Reset and then
press the SELECT button. A confirmation box appears. Move the
pointer to [Yes] and then press the SELECT button.

Filter

Special

Special icon

Select [Yes]
to activate it.

Note:

Select Fan control and this
box appears. Select one of
these settings with the

Point

buttons (

and

) or

Control pad and press the
SELECT button to enable it.

The setting selected.

Move the pointer to Reset and
then press the SELECT button
and the confirmation box
appears.

Select [Yes] to
activate it.

Downloaded From projector-manual.com Christie Manuals

Special

Auto PC adj.

Select On to enable the Auto PC adjust function and Off to
disable it. Refer to page 30 and 40 for Auto PC adjust function.

Test pattern

Various test patterns are prepared in this projector allowing users
to test the projection. Select one from the following twenty kinds
of patterns: Cross 1 (W), Cross 2 (R), Cross 3 (G), Cross 4 (B),
Cross 5 (M), Cross 6 (C), Cross 7 (Y), Gradation 1~4, Color, and
Flat 1~8.

To cancel the Test pattern, press the CANCEL button on the top
control or the remote control.

Select Test pattern and then
the Test pattern selection
box is displayed. Choose
one of these patterns with
the

Point buttons (

and

) or

Control pad and press

the SELECT button to
display the selected pattern
on screen.

Test pattern

Indicates the other items
exist below.

RS-232C

This feature allows users to set serial communication
configuration (baud rate and the projector ID) when connecting
several projectors via the RS-232C terminal of the projector. (p13,
78)

Baud rate  . . . . .9600 / 19200
Projector ID  . . .001 ~ 999
Default  . . . . .returns Baud rate and Projector ID to factory

default setting
(Baudrate: 19200, Projector ID: 001)

USB memory

This feature allows users to store PC mode and Image adjustment
data on the optional USB key connected to the projector and recall
it from the USB key. PC mode data and Image adjustment data
can be stored separately on respective 10 memory areas of the
USB key. (PC mode data: mode 1 50 x 10, Image adjustment
data: Image 1-10 x 10) (p43, 47)

Save . . . . . .stores the adjustment data on the USB key

connected to the projector.

Load . . . . . . . . .recalls the stored data.
Delete . . . . . . .deletes the stored data.

To use the USB memory function, the optional USB key
(separately provided) is required. Refer to page 73 for the USB key
information and contact the sales dealer or service station for
purchasing. For further information on USB memory function, refer
to the owner's manual that comes with the USB key.

RS-232C

USB memory

Note:

The item selected.

Move the pointer to one of
these and then press the
SELECT button and USB
Memory Menu appears .

To be continued to the next page.

Downloaded From projector-manual.com Christie Manuals

Special

Warning log

Warning log shows the information of the past warning history of
the projector. Up to 50 logs can be displayed. Log contents are as
follows:

Lamp-1 failure
Lamp-2 failure
Lamp-1 timeover
Lamp-2 timeover
Power failure
Inside temp. A error
Inside temp. B error
Inside temp. C error
External temp. error
Power off (Power management)
Power off (Shutter management)
PJ filter timeover
Option box filter timeover
Option box error

Warning log

Exits Warning log menu.

Quit

Information

displays current setting information: Input, System, Signal, Screen, Language, Lamp
mode, Lamp status, Power management, Shutter management, Smoke resist,
Option filter time, Security, and Remote control.

Information

Press the MENU button to display On-Screen Menu. Spin
Menu icons with the Point buttons (

and

) or Control pad

and press the SELECT button when the INFORMATION icon
comes right in front.

The Information window appears. The information window
can also be displayed by pressing the INFORMATION button
on the top control or the INFO button on the remote control.

Special

Select [Yes] to
activate it.

USB Memory Menu

Move the yellow frame
pointer to a USB memory
to store the data and then
press the SELECT button.
The confirmation box
appears.

Exits the Warning log menu.

Downloaded From projector-manual.com Christie Manuals

If the WARNING TEMP indicator remains blinking after performing
above checks, the cooling fans or the internal circuits may be
malfunctioned. Contact the service station for check-up and repair.

Warning Temp Indicator

The WARNING TEMP indicator shows the state of the function which protects the projector. Check the state of the
WARNING TEMP indicator and the READY indicator to take proper maintenance.

TOP CONTROL

The projector is shut down and WARNING TEMP indicator is
blinking red.

The WARNING TEMP indicator slowly blinks red to let you know
the internal temperature of the projector exceeds the normal level.
If the temperature goes up further, the WARNING TEMP indicator
turns fast blinking and then the projector will be turned off
automatically. Then, the READY indicator will go out, but the
WARNING TEMP indicator keeps blinking red. When the
temperature inside the projector returns to normal, the READY
indicator lights green and then the projector can be turned on. If
the WARNING TEMP indicator still keeps blinking after the
projector is turned on, check the followings;

Note:

Then check the matters below:

LAMP 1 REPLACE, WARNING
TEMP, WARNING FILTER, READY,
SHUTTER , and LAMP 2 REPLACE
blinking altogether.

TOP CONTROL

All indicators except the LAMP indicator are blinking.

When the projector detects an abnormal condition, it is
automatically shut down to protect the inside and all the Indicators
except the LAMP indicator start blinking. In this case, disconnect
the AC power cord and reconnect it, and then turn the projector on
once again for check. If the projector cannot be turned on,
disconnect the AC power cord and contact service station for
check and repair.

CAUTION

DO NOT LEAVE THE PROJECTOR WITH THE AC
POWER CORD CONNECTED UNDER THE ABNORMAL
CONDITION. IT MAY RESULT IN FIRE OR ELECTRIC
SHOCK.

WARNING TEMP
blinking red

LAMP
lighting red

Maintenance and Cleaning

Did you provide appropriate space for the projector to be
ventilated? Check the installing condition to see if ventilation
slots are not blocked.
Is the projector not installed near the ventilation duct of air-
conditioning equipment which may be hot? Install the
projector away from the ventilation duct of air-conditioning
equipment.
Are the air filter clean? Check the air filter periodically. (p61)

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

Turn off the projector, and disconnect the AC power cord
from the AC outlet.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when
operating a projector. Usage in these environments may
cause poor image quality.

When using under dusty or smoky conditions, dust may
accumulate on liquid crystal panel, lens, or optical elements inside
it. This condition may degrade quality of projected image.
When above symptoms are noticed, contact your authorized
dealer or service station for proper cleaning.

Pull down the tabs on both sides top of the filter cover and
open the projector cover.

Pull out the air filter from the projector.

Replace the new air filter and the filter cover properly onto
the projector.

Reset the Filter time.

See Filter in the Special menu on

page 57.

Filter cover

CAUTION

Do not operate a projector with Air Filter removed. Dust
may accumulate on LCD Panel and Mirror degrading
picture quality.
Do not put small parts into Air Intake Vents. It may result
in malfunction of a projector.

Air Filter Replacement

Air filter

Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters
become clogged with dust particles, it will reduce cooling fans effectiveness and may result in internal heat build up and
adversely affect the life of the projector. Proper maintenance should be taken.

TOP CONTROL

WARNING FILTER
lights orange

This projector can monitor the filter condition. When the filter is
clogged with dust and the performance is degraded, the
WARNING FILTER indicator lights orange and let you know the
filter replacement is required.
If the indicator is lighting orange, turn off the projector and replace
the air filter immediately.
Using the projector with the WARNING FILTER indicator lighting
may result in internal heat build up and cause damage to the
optical elements inside the projector. The projector will shutdown
automatically to protect itself when the projector's inside
temperature is abnormally high.

WARNING FILTER Indicator

Maintenance & Cleaning

Note:

ORDER REPLACEMENT FILTER

When ordering the replacement air filter, give the following information to the dealer.

Model No. of your projector

103-005001

Replacement Filter Part No.

10-A6103151588

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

CAUTION :
DO NOT OPERATE A PROJECTOR WHILE ANY OF LAMPS IS
REMOVED. IT MAY RESULT IN MALFUNCTIONS, FIRE
HAZARD, OR OTHER ACCIDENTS.

Lamp Replacement

When the life of the projection lamps of this projector draw to an
end, the LAMP 1 and 2 REPLACE indicators light orange. If one of
these indicators lights orange, replace the lamp with a new one
promptly.

Follow these steps to replace the lamp.

Handle

Lamp covers

For continued safety, replace with a lamp of the same
type. Do not drop a lamp or touch a glass bulb! The
glass can shatter and may cause injury.

Allow a projector to cool, for at least 45 minutes before
you open the Lamp cover. The inside of the projector
can become very hot.

Top Control

CAUTION

Screws

(Unremovable)

Turn off the projector and disconnect the AC plug. Allow the
projector to cool for at least 45 minutes.

Loosen two (2) screws of each lamp with a screwdriver and
pull out one lamp and another with grasping the handle.

Replace each lamp with a new one and tighten the two (2)
screws back into the positions. Make sure that the lamp is
set properly. Replace the lamp covers and tighten the
screws.

Loosen each screw on the lamp covers with a screwdriver,
and remove the lamp covers.

Connect the AC power cord to the projector and turn on the
projector.

Reset the Lamp time.

See Lamp on page 57.

Handle

Screws

NOTES ON LAMP REPLACEMENT:

These indicators light orange when the life of the
projection lamps draw to an end.

Lamp 1

LAMP 2 REPLACE
indicator

LAMP 1 REPLACE
indicator

Lamp 2

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result
in accidents, injury, or create a fire hazard.

Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the

same lifetime for each lamp. Some lamps may fail or terminate their lifetime in a shorter period of time than other
similar lamps.

If the projector indicates that the lamp should be replaced, i.e., if the LAMP REPLACE INDICATOR lights up,

replace the lamp with a new one IMMEDIATELY after the projector has cooled down.
(Follow carefully the instructions in the LAMP REPLACEMENT section of this manual.) Continuous use of the
lamp with the LAMP REPLACE INDICATOR lighted may increase the risk of lamp explosion.

A Lamp may explode as a result of vibration, shock or degradation as a result of hours of use as its lifetime draws

to an end. Risk of explosion may differ according to the environment or conditions in which the projector and lamp
are being used.

IF A LAMP EXPLODES, THE FOLLOWING SAFETY PRECAUTIONS SHOULD BE TAKEN.

If a lamp explodes, disconnect the projector s AC plug from the AC outlet immediately. Contact an authorized service
station for a checkup of the unit and replacement of the lamp. Additionally, check carefully to ensure that there are
no broken shards or pieces of glass around the projector or coming out from the cooling air circulation holes. Any
broken shards found should be cleaned up carefully. No one should check the inside of the projector except those
who are authorized trained technicians and who are familiar with projector service. Inappropriate attempts to service
the unit by anyone, especially those who are not appropriately trained to do so, may result in an accident or injury
caused by pieces of broken glass.

ORDER REPLACEMENT LAMP

Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following
information to the dealer.

Model No. of your projector

103-005001

Replacement Lamp Type No.

03-000881-01P

(Service Parts No. 610 315 7689)

LAMP HANDLING PRECAUTIONS

Maintenance & Cleaning

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

Disconnect the AC power cord before cleaning.

When the projector is not in use, replace the lens cover.

Follow these steps to clean the projection lens.

Disconnect the AC power cord before cleaning.

Softly wipe the projector body with a soft, dry cleaning cloth.
When it is heavily soiled, use a small amount of mild
detergent and finish with a soft, dry cleaning cloth. Avoid
using an excessive amount of cleaner. Abrasive cleaners,
solvents, or other harsh chemicals might scratch the surface
of the lens.

Follow these steps to clean the projector cabinet.

When the projector is not in use, put the projector in an
appropriate carrying case to protect it from dust and
scratches.

Softly wipe the projection lens with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use lens cleaning paper or a commercially
available air blower to clean the lens. Avoid using an
excessive amount of cleaner. Abrasive cleaners, solvents, or
other harsh chemicals might scratch the surface of the lens.

When mounting the projector on the ceiling, connect the front
cover to the projector with the provided cord cover strap to avoid
the front cover from falling down.

Race the string through a hole on right edge of the
projector's terminal area.

Fix the string to the hole inside the front cover with the
screw.

Screw

Cord Cover
Strap

Hole

Attaching the Cord Cover Strap

String hole

Cleaning the Projector Cabinet

Cleaning the Projection Lens

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

Maintenance & Cleaning

READY

Green

LAMP

Red

WARNING

TEMP

Red

Indicators

The projector is OFF. (The AC power cord is unplugged.)

The projector is preparing for stand-by or the projection lamp is being cooled
down. The projector cannot be turned on until cooling is completed.

The projector is operating normally.

The projector is in the Power management mode.

The temperature inside the projector is abnormally high. The projector cannot
be turned on. When the projector is cooled down enough and the
temperature returns to normal, the LAMP indicator lights red and the
projector can be turned on.

The projector detects an abnormal condition and cannot be turned on. Unplug
the AC power cord and plug it again to turn on the projector. If the projector
is turned off again, disconnect the AC power cord and contact the dealer or
the service center for service and checkup. Do not leave the projector on. It
may cause electric shock or a fire hazard.

The projector is ready to be turned on with the POWER ON-OFF button.

The projector has been cooled down enough and the temperature returns to
normal. When turning on the projector, the WARNING TEMP indicator stops
blinking. Check and clean the air filters.

Projector Condition

Off

Dim lighting

Lighting

Blinking

LED Conditions:

Main Indicators

Indicators and Projector Condition

READY, WARNING
TEMP, SHUTTER,
WARNING FILTER, LAMP
1 REPLACE, AND LAMP 2
REPLACE indicators are
blinking all together.

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

READY

Green

SHUTTER

Blue

LAMP

Red

Indicators

The shutter is closed. (The projector is On.)

The shutter is out of control. (The projector is in the stand-by mode.) In this
case, contact the service station immediately.

Projector Condition

Slow

Fast

READY

Green

WARNING

FILTER

Orange

LAMP

Red

Indicators

The air filter is clogged with dust or has been used overtime.

The air filter has been used overtime.

Projector Condition

Fast

Warning Filter Indicator

In the Shutter management mode. (The projector is in the stand-by mode.)

Slow

The air filter is not installed.

Slow

The shutter is out of control. (The projector is in the cooling mode.) In this
case, contact the service station immediately.

In the Shutter management mode. (The projector is in the cooling mode.)

Shutter Indicator

Downloaded From projector-manual.com Christie Manuals

Maintenance and Cleaning

When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones

promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63.

Maintenance & Cleaning

Lamp Replace Indicators

READY

Green

LAMP 1/2
REPLACE

Orange

LAMP

Red

Indicators

The lamp cannot light up. (The projector is preparing for stand-by or the
projection lamp is being cooled down. The projector cannot be turned on
until cooling is completed.)

The lamp cannot light up. (The lamp has been cooled down enough and the
projector is in stand-by mode and ready to be turned on with the POWER
ON-OFF button.)

The lamp of which indicator is lighting has been used overtime. Replace the
lamp and then reset the Lamp time. The indicator will turn off.

Either lamp cover is not replaced or fit in.
Both of the indicators keeps blinking three times at regular intervals and the
projector cannot be turned on.

The lamp is not installed in the projector.

Projector Condition

Slow

Fast

Slow

Both

Downloaded From projector-manual.com Christie Manuals

Troubleshooting

Before calling your dealer or service center for assistance, check the items below once again.

Make sure you have properly connected the projector to peripheral equipment as described on pages 22~24.
Make sure all equipment is connected to AC outlet and the power is turned on.
When you operate the projector with a computer and it does not project an image, restart the computer.

See Information by pressing the INFO. button to check the current projector condition before trying the solutions
below.

Problem:

Solutions

No power

Plug the power cord of the projector into the AC outlet.
Make sure the Main On/Off switch is on.
See if the LAMP indicator lights red.
Wait 90 seconds after the projector is turned OFF when turning the
projector back on. The projector can be turned on after the READY indicator
turns green. (

Turning Off the Projector on page 28)

Check the WARNING TEMP. indicator. If the WARNING TEMP. indicator
lights red, the projector cannot be turned on.
(

Warning Temp Indicator on page 60)

Check the projection lamp. (

p. 62)

Unlock Key lock for the projector in the Setting Menu. (

p. 54)

Check if the air filter is fully installed and the filter cover is completely
closed. (

p. 61)

Image is out of focus.

Adjust focus of the projector. (

p. 29)

Check the projection lens to see if it needs cleaning. (

p. 64)

Moving the projector from a cool to a warm place may result in moisture
condensation on the projection lens. In such cases, leave the projector
OFF and wait until condensation disappears.

No image

Check the connection between your computer or video equipment
and the projector. (

p. 22 24)

See if the input signal is correctly output from your computer. Some laptop
computers may need to change the setting for monitor output when
connecting to a projector. See your computer s instruction manual for the
setting.
It takes about 20 seconds to display an image after turning on the projector.
See if the selected system is corresponding with your computer or video
equipment. (

p. 38 39)

Select correct input source once again through menu operation.
(

p. 36 37)

Make sure the temperature is not out of the specified Operating
Temperature (5 C ~ 35 C).
Check if the shutter is closed. (

p. 29)

Image is dark.

Adjust Brightness and Contrast in the Image adjust menu. (

p. 44)

Check the Shutter level. (

p. 53)

Check each lamp condition and the LAMP 1/2 REPLACE indicators.
(

p. 62, 67)

Image is Left/Right reversed.

Check the Ceiling / Rear item. (

Screen Setting on page 48.)

Image is Top/Bottom reversed.

Check the Ceiling item. (

Screen Setting on page 48.)

Appendix

Downloaded From projector-manual.com Christie Manuals

Appendix

Some displays are not seen

Check the Display item. (

Setting on page 52)

during the Operation.

Only part of image is displayed.

Check if you are in D. Zoom+/ mode. (

p. 32, 48)

(Large/Small)

Change Aspect setting in the Screen setting menu. (

p. 47)

Adjust Display area and Position in the PC adjust menu. (

p. 41 42)

PIN code dialog box appears at start-up.

PJ PIN code lock is being set. Input a PIN code (1234 or numbers you have
set). (

Enter a PJ PIN Code on pages 27 and 55)

Image is not displayed on the

Select Input 1 with the Input button on the top control or the INPUT 1 button

monitor connected to the ANALOG

on the remote control, or through the Input Menu. (

p. 30, 36)

OUT terminal.

Make sure Analog out is On. (

Setting on page 53)

The Top Control does not work.

Check if the Keylock function is set. (

Setting on page 54)

The Wireless Remote Control

Check the batteries. When replacing, the two batteries should be replaced

does not work.

at the same time. (

page 17)

Make sure no obstruction is between the projector and remote control.
Make sure you are not too far from the projector when using the remote
control. Maximum operating range is 32.8 (10m).
Make sure the ID and CH of the remote control is conformed to the
projector. (

p. 16, 51)

Initialize the remote control ID and CH, and then initialize the remote control
ID and CH of the projector as well. (

p. 16, 51)

Unlock Key lock for the remote control in the Setting Menu. (

p. 54)

Make sure the wired remote cable is not connected to the projector.
(

p. 25)

When all the solutions above fail, try Factory default in the Setting menu.
(

p. 56)

USB mouse does not operate properly.

Check cable connection of the USB mouse and the projector. (

p. 25)

SHUTTER button does not operate.

Make sure Shutter protection is Off. (

Setting on page 53)

Lens position moves when Input

Check Lens memory for each input. (

Setting on page 53)

is switched.

Some operating menu items do not appear.

Check the My menu setting. (

Setting on page 49)

WARNING :
High voltages are used to operate this projector. Do not attempt to open the cabinet.

Appendix

You can often correct operating problems yourself. If a projector fails to work properly, see "TROUBLESHOOTING" section
on page 68, 69. To correct failure, try "Solutions".
If after following all operating instructions, you find that service is necessary, contact Christie Service Station or store where
you purchased unit. Give model number and explain difficulty. We will advise you how to obtain service.

Downloaded From projector-manual.com Christie Manuals

Appendix

Basically this projector can accept a signal from all computers with V- and H-Frequency mentioned below and
less than 230 MHz of Dot Clock.

(Interlace)

1024 x 768

(Interlace)

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

VGA 1

640 x 480

31.47

59.88

VGA 2

720 x 400

31.47

70.09

VGA 3

640 x 400

31.47

70.09

VGA 4

640 x 480

37.86

74.38

VGA 5

640 x 480

37.86

72.81

VGA 6

640 x 480

37.50

75.00

MAC LC13

640 x 480

34.97

66.60

MAC 13

640 x 480

35.00

66.67

MAC 16

832 x 624

49.72

74.55

MAC 19

1024 x 768

60.24

75.08

MAC 21

1152 x 870

68.68

75.06

UXGA 3

1600 x 1200

87.50

70.00

UXGA 4

1600 x 1200

93.750

75.00

SVGA 1

800 x 600

35.156

56.25

SVGA 2

800 x 600

37.88

60.32

SVGA 3

800 x 600

46.875

75.00

SVGA 4

800 x 600

53.674

85.06

SVGA 5

800 x 600

48.08

72.19

SVGA 6

800 x 600

37.90

61.03

SVGA 7

800 x 600

34.50

55.38

SVGA 8

800 x 600

38.00

60.51

SVGA 9

800 x 600

38.60

60.31

SVGA 11

800 x 600

38.00

60.51

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

XGA 11

1024 x 768

XGA 13

1024 x 768

XGA 14

1024 x 768

61.00

75.70

XGA15

1024 x 768

46.90

58.20

XGA 8

1024 x 768

47.00

58.30

XGA 9

1024 x 768

(Interlace)

58.03

72.0

SXGA 1

1152 x 864

SXGA 2

1280 x 1024

63.48

79.35

SXGA 3

1280 x 1024

36.00

87.17

SXGA 4

1280 x 1024

64.20

70.40

SXGA 5

1280 x 1024

62.50

58.60

SXGA 6

1280 x 1024

63.90

60.00

SXGA 7

1280 x 1024

63.34

59.98

SXGA 8

1280 x 1024

63.74

60.01

SXGA 11

1152 x 900

71.69

67.19

SXGA 12

1152 x 900

81.13

76.107

SXGA 13

1280 x 1024

(Interlace)

63.98

60.02

SXGA 14

1280 x 1024

(Interlace)

61.20

65.20

71.40

75.60

50.00

86.00

720p

(Progressive)

50.00

94.00

45.00

60.00

XGA 1

1024 x 768

XGA 2

1024 x 768

XGA 3

1024 x 768

XGA 4

1024 x 768

48.36

60.00

68.677

84.997

XGA 6

1024 x 768

60.023

75.03

XGA 7

1024 x 768

56.476

70.07

48.50

60.02

44.00

54.58

SXGA 9

1280 x 1024

SXGA 10

1280 x 960

79.976

75.025

60.00

SXGA 15

1280 x 1024

SXGA 16

1280 x 1024

SXGA 17

1152 x 900

SXGA 18

1280 x 1024

(Interlace)

63.37

60.01

76.97

72.00

61.85

66.00

46.43

86.70

SXGA 19

1280 x 1024

63.79

60.18

XGA 5

1024 x 768

60.31

74.92

VGA 7

640 x 480

43.269

85.00

575i

(Interlace)

15.625

50.00

480i

(Interlace)

15.734

60.00

1080i/60

(Interlace)

33.75

60.00

1035i

(Interlace)

33.75

60.00

SVGA 10

800 x 600

32.70

51.09

SXGA 20

1280 x 1024

91.146

85.024

480p

(Progressive)

31.47

59.88

XGA 10

1024 x 768

62.04

77.07

1080i/50

28.125

50.00

SXGA 21

1400 x 1050

63.90

60.00

MAC

1280 x 960

75.00

75.08

UXGA 1

1600 x 1200

75.00

60.00

UXGA 2

1600 x 1200

81.25

65.00

XGA 12

35.522

86.96

575p

(Progressive)

31.25

50.00

MAC

1280 x 1024

80.00

75.08

WXGA 3

1376 x 768

48.36

60.00

WXGA 4

1360 x 768

56.16

72.00

WXGA 1

1366 x 768

48.36

60.00

WXGA 2

1360 x 768

47.70

60.00

Compatible Computer Specifications

Downloaded From projector-manual.com Christie Manuals

Appendix

Proper image may not be obtained in some signals. Specifications are subject to change without notice.

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

D-VGA

640 x 480

31.47

59.94

D-480p

720 x 480

(

Progressive

)

31.47

59.88

D-575p

768 x 575

(

Progressive

)

31.25

50.00

D-SVGA

800 x 600

37.879

60.32

D-XGA

1024 x 768

43.363

60.00

ON-SCREEN

DISPLAY

RESOLUTION

H-Freq.

(KHz)

V-Freq.

(Hz)

D-SXGA1

1280 x 1024

63.98

60.02

D-SXGA2

1280 x 1024

60.276

58.069

When a input signal is digital from DVI terminal, refer to chart below.

D-WXGA1

1366 x 768

48.36

60.00

D-WXGA2

1360 x 768

47.70

60.00

D-WXGA3

1376 x 768

48.36

60.00

D-UXGA

1600 x 1200

75.00

60.00

Appendix

D-720p

1280 x 720

(

Progressive

)

45.00

60.00

D-1035i

1920 x 1035

(Interlace)

33.75

60.00

D-1080i/60

1920 x 1080

(

Interlace

)

33.75

60.00

D-1080i/50

1920 x 1080

(Interlace)

28.125

50.00

Downloaded From projector-manual.com Christie Manuals

Appendix

Technical Specifications

Mechanical Information

Projector Type

Multi-media Projector

Dimensions (W x H x D)

20.39 x 9.92 x 23.86 (518mm x 252mm x 606mm) (Not including adjustable feet)

Net Weight

54.3 lbs (24.7kg)

Feet Adjustment

0 to 3.65

Panel Resolution

LCD Panel System

1.4 TFT Active Matrix type, 3 panels

Panel Resolution

1024 x 768 dots

Number of Pixels

2,359,296 (1024 x 768 x 3 panels)

Signal Compatibility

Color System

PAL, SECAM, NTSC, NTSC4.43, PAL-M, and PAL-N

High Definition TV Signal

480i, 480p, 575i, 575p, 720p, 1035i, and 1080i

Scanning Frequency

H-sync. 15 ~ 120 KHz; V-sync. 48 ~ 120 Hz

Optical Information

Projection Image Size (Diagonal)

Subject to Optional lens

Projection Lens

Option

Throw Distance

Subject to Optional lens

Projection Lamp

300W

Interface

Input 1 terminals

DVI-D Terminal (Digital in) (HDCP Compatible) x1

and (VGA) HDB15 Terminal x 2 (Analog In/Analog Out)

Input 2 terminals

BNC Type x 5 (G/ VIDEO/Y, B/ Cb/Pb, R/ Cr/Pr, H/V, V)

Input 3 terminals

RCA Type x 3 (VIDEO/Y, Cb/Pb, Cr/Pr) and Mini DIN 4 pin x 1 (S-Video)

Other Terminals

SERIAL PORT IN

DB9 pin x 1

SERIAL PORT OUT

DB9 pin x 1

USB Connectors

USB Series A receptacle x 1 and USB Series B receptacle x 1

R/C Jack

Mini Jack x 1

Power

Voltage and Power Consumption

AC 100 ~ 120 V (9.5 A Max. Ampere), 50/60 Hz (The U.S.A and Canada)

AC 200 ~ 240 V (4.5 A Max. Ampere), 50/60 Hz (Continental Europe)

Operating Environment

Operating Temperature

41 F ~ 95 F (5 C ~ 35 C)

Storage Temperature

14 F ~ 140 F (-10 C ~ 60 C)

Remote Control

RF Remote Standard

2.4 GHz Low Power Radio

Frequency Band

2.472GHz (CH1: default setting), 2.403GHz (CH2), 2.446 GHz (CH3), and 2.421GHz (CH4)

Battery

AA or LR6 1.5V ALKALINE Type x 2

Operating Range

Within 32.8 (10m)

Dimensions

2.0 x 1.2 x 7.1 (50mm x 30mm x 181mm)

Net Weight

0.33 lbs (150 g) (including batteries)

Downloaded From projector-manual.com Christie Manuals

Appendix

SCART-VGA Cable

Projector USB Key

Smoke Resist Box

Wired Remote Cable (30m)

Advanced Network

Dual SDI

Faroudja

DVI (HDCP compatible)

D-Sub

Warp & Blending

The parts listed below are optionally available. When ordering those parts, give the item name, Model No., and Option
Control No. (if necessary) to the sales dealer.

Optional Parts

Accessories

Owner s Manual

AC Power Cord

Remote Control and Batteries

VGA Cable

Lens Attachment

Light Block Plates (2 types)

Real Color Manager Pro (CD-ROM)

Cord Cover Strap

Security Label (PIN Code/USB Key)

The specifications are subject to change without notice.

LCD panels are manufactured to the highest possible standards. Even though 99.99% of the pixels are effective, a tiny fraction of the

pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.

The On-Screen Menu and figures in this manual may differ slightly from the product.

Appendix

Downloaded From projector-manual.com Christie Manuals

Appendix

System (1)

Input 2

Video

System (1)

Input 1

RGB

INPUT

(2)

SYSTEM

XGA 5

Mode 1

XGA 1

XGA 3

Auto PC adj.

Fine sync

Total dots

Current mode

Clamp

Position

Display area

Store

Quit

0 - 31

Yes/No

(1)

SECAM

NTSC

Auto

PAL

PAL-M

PAL-N

NTSC4.43

Quit

Reset

System (2)

Input 3

System (2)

System (3)

Auto

Mode

Menu Tree

RGB (PC Analog)

RGB (Scart)

RGB (PC Digital)

System (1)

RGB (AV HDCP)

System (1)

Video

Y, Pb/Cb, Pr/Cr

System (3)

S-Video

Input 5

Optional Slot

Quit

Systems displayed in the System Menu vary
depending on an input signal.

SCREEN
SETTING

Screen

Wide

True

Normal

Scale

Position

Full screen

PC ADJ.

Off/On

Ceiling

Off/On

Rear

Quit

D. Zoom+/D. Zoom

Keystone

Width

Phase

0 - 15

Custom

H&V

Common

Reset

Yes/No

Quit

D. Zoom

(3)

SYSTEM

1035i

720p

Auto

1080i

480p

575i

575p

480i

Quit

V sync. phase

Yes/No

Store/Reset

Free

Input 4

Optional Slot

System (2)

Downloaded From projector-manual.com Christie Manuals

Appendix

Language

SETTING

Power management

Remote control code

Key lock

Contrast

Brightness

Color

Red

Green

Blue

Sharpness

Store

Quit

0 - 63

0 - 15

Image 1

Image 2

Image 3

Image 4

Image 5

Tint

0 - 63

Gamma

Noise reduction

0 - 15

Off

Reset

Yes/No

Film

Off/On

Progressive

Off/On

Color temp.

Image 6

Image 7

Image 8

Image 9

Image 10

Quit

Standard (AV)

Standard (PC)

Real

Image 1

Image 2

Image 3

IMAGE

Image 4

Cinema

Image 5

Image 6

Image 7

Image 8

Image 9

Image 10

Quit

IMAGE
ADJ.

Color management

Gamma

All Del

Color. M

Auto picture control

Off

Low

Mid

XLow

Off/Ready/Shut down

CH 1 4

Remote control

Off

Projector

ID 1 8

1 ~ 60 minutes

Yes/No

English

German

French

Italian

Spanish

Portuguese

Dutch

Swedish

Chinese

Korean

Japanese

Russian

Position

Simple menu

My menu

Factory default

Off/On

Logo

Logo select

Capture

Yes/No

Default

Off

My logo

Lock

Off/On

PIN code change

Background

Blue

Black

My logo

Lamp

Control

Mode

2-Lamp

1-Lamp

Normal

Eco

Auto

Display

Off/On

Input search

Off/On

On start

Off/On

Analog out

Off/On

Lens memory

Input 1 5

Off

Memory

Shutter

Level

Remote control

Normal

High contrast

Protection

5 ~ 180 minutes

Management

Security

On 2

Off

PJ lock

On 1

Registration

Delete

USB Lock

Setting

PJ PIN code change

On 2

Off

On 1

Lamp1

Lamp2

Auto

Color

Appendix

High

Projector

The other USB

The USB plugged in

Color. M

List

Downloaded From projector-manual.com Christie Manuals

Appendix

Input

Signal

Screen

Language

Lamp mode

Lamp status

INFORMATION

Power management

System

Shutter management

Smoke resist

Option filter time

Security

Remote control

Quit

Lamp

SPECIAL

Quit

Filter

Lamp 1

Lamp 2

Option box

RS 232C

Baud rate

Projector ID

9600

19200

Warning log

USB memory

PC mode

Save

Delete

Load

Reset

Hour(s)

Yes/No

Reset

Hour(s)

Yes/No

Fan control

Max

Hour(s)

Reset

Hour(s)

Reset

Yes/No

001 999

USB memory 1 10

Quit

Projector

USB memory 1 10

Quit

USB memory 1 10

Quit

Image adj.

Save

Load

USB memory 1 10

Quit

USB memory 1 10

Quit

Normal

Delete

Auto PC adj.

Off/On

Test pattern

Cross 1 (W)

Cross 3 (G)

Cross 2 (R)

Cross 4 (B)

Cross 6 (C)

Cross 5 (M)

Cross 7 (Y)

Color

Gradation 1~4

Flat 1~8

Default

Yes/No

Downloaded From projector-manual.com Christie Manuals

Appendix

20.39 (518)

23.86 (606)

Unit : inch (mm)

3.65 (Max.)

9.92 (252)

7.24 (184)

5.31 (135)

Dimensions

1.08 (27.5)

Appendix

18.11 (460)

13.58 (345)

18.27 (464)

9.15 (232.5)

14.52 (369)

2.36 (60)

Screw Holes for Ceiling Mount
Screws: M8
Depth: 0.31(8.0)

Downloaded From projector-manual.com Christie Manuals

Appendix

Terminal Configurations

Terminal: DIB 9-PIN

SERIAL PORT IN /OUT TERMINAL

ANALOG INPUT / OUTPUT TERMINAL (ANALOG)

Terminal: HDB15-PIN

USB CONNECTOR (Series B)

-----

R X D

T X D

-----

GND

-----

Serial

Red (R/Cr) Input / Output

Ground (Horiz.sync.)

Green (G/Y) Input / Output

-----

Blue (B/Cb) Input / Output

Ground (Red)

Ground (Green)

Ground (Blue)

-----

Horiz. sync. Input/Output (Composite H/V sync.)

Ground (Vert.sync.)

-----

Ground / -----

Vert. sync.

-----

T.M.D.S. Data2

No Connect

T.M.D.S. Data2+

No Connect

T.M.D.S. Data2 Shield

DDC Clock

DDC Data

No Connect

T.M.D.S. Data1

No Connect

T.M.D.S. Data1+

No Connect

T.M.D.S. Data1 Shield

+5V Power

Ground (for +5V)

Hot Plug Detect

T.M.D.S. Data0

No Connect

T.M.D.S. Data0+

No Connect

T.M.D.S. Data0 Shield

T.M.D.S. Clock Shield

T.M.D.S. Clock+

T.M.D.S. Clock

DVI-D TERMINAL (DIGITAL)

Terminal: DVI-D

-----

Vcc

- Data

+ Data

Ground

Series B

Downloaded From projector-manual.com Christie Manuals

Appendix

Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the
number and unable to operate the projector, contact the service station.

Factory default set No: 1 2 3 4*

Factory default set No: 4 3 2 1*

*Should the four-digit number be

changed, the factory set number will
be invalid.

PIN Code Lock No.

Logo PIN Code Lock No.

PIN Code Number Memo

Put the appropriate label (supplied) on in a prominent place of the
projector's body while it is locked with a PIN code or USB key.

While the projector is locked with the PIN code or USB key...

Pixelworks ICs used.

Appendix

This symbol on the nameplate means the product is
Listed by Underwriters Laboratories Inc. It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.

The CE Mark is a Directive conformity
mark of the European Community (EC).

PIN code label

Downloaded From projector-manual.com Christie Manuals

Appendix

Numerics

2:2 Pulldown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

2:3 Pulldown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

AC plug type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 20

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Adjustable Feet . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 19

Analog out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Appendix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Aspect setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Auto PC Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Auto PC Adjustment . . . . . . . . . . . . . . . . . . . . . . . . .30

Auto picture control . . . . . . . . . . . . . . . . . . . . . . . . .45

AV System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Baud rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Carrying Handle . . . . . . . . . . . . . . . . . . . . . . . . . . .7, 9

Ceiling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Ceiling Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Cinema . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64

Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Color Management . . . . . . . . . . . . . . . . . . . . . . . . . .44

Color Management List . . . . . . . . . . . . . . . . . . . . . .45

Color Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Color System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Color temp. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Compatible Computer Specifications . . . . . . . . . . . .70

COMPONENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Connecting to Computer . . . . . . . . . . . . . . . . . . . . .22

Connecting to Video Equipment . . . . . . . . . . . . .23, 24

Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Control Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 14

Cord Cover Strap . . . . . . . . . . . . . . . . . . . . . . . . . . .64

D-Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 32, 48

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72, 77

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Dual SDI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

DVI-D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12,, 78

Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Fan control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Faroudja . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Federal Communication Commission Notice . . . . . . .8

Film . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 46

Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57, 61

Filter Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Focus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 29

Freeze . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Front cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Full screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Gamma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

H&V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Handling the Projector . . . . . . . . . . . . . . . . . . . . . . . .7

HDB15-PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Image Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10, 65

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 59

Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30, 36

Input Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Interface Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Keylock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Keystone . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 31, 48

Lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51, 57

Lamp Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Lamp Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Lamp Replace Indicator . . . . . . . . . . . . . . . . . . . . . .67

Lamp Replacement . . . . . . . . . . . . . . . . . . . . . . . . . .62

Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Lens Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Lens memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Lens Shift . . . . . . . . . . . . . . . . . . . . . . . . .2, 19, 26, 29

Logo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Logo Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Logo PINcode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Logo Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Manual PC Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Menu Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Menu Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Menu Tree . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Mouse Operation . . . . . . . . . . . . . . . . . . . . . . . .25, 33

Index

Downloaded From projector-manual.com Christie Manuals

Appendix

Moving the Projector . . . . . . . . . . . . . . . . . . . . . . . . .7

My Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

My menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Network Manager . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Noise reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Normal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

On start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

On-Screen Menu . . . . . . . . . . . . . . . . . . . . .33, 34, 35

Option Control No. . . . . . . . . . . . . . . . . . . . . . . .21, 73

Optional Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

P-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Panel Resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Parts Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

PC Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

PC System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

PIN code . . . . . . . . . . . . . . . . . . . . . . . . . . . .27, 55, 79

PJ lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6, 18

Power management . . . . . . . . . . . . . . . . . . . . . . . . .52

Progressive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Projector Condition . . . . . . . . . . . . . . . . . . . . . . . . . .65

Projector ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Radio Wave . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

READY indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Real . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Reference Buttons . . . . . . . . . . . . . . . . . . . . . . . . . .26

Remote Control . . . . . . . . . . . . . . . . . . . . . .14, 16, 72

Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Remote Control Battery Installation . . . . . . . . . . . . .17

Remote Control Channel and ID . . . . . . . . . . . . . . . .16

REPLACEMENT LAMP . . . . . . . . . . . . . . . . . . . .61, 63

RESET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

RS-232C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Scale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Scanning Frequency . . . . . . . . . . . . . . . . . . . . . . . . .72

Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31, 47

Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

SERIAL PORT . . . . . . . . . . . . . . . . . . . . . . . . . . .13, 78

Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 29, 53

SHUTTER indicator . . . . . . . . . . . . . . . . . . . . . . . . . .10

Shutter Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Shutter level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Shutter Management . . . . . . . . . . . . . . . . . . . . . . . .54

Shutter protection . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Simple menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Smoke Resist Box . . . . . . . . . . . . . . . . . . . . . . . . . .73

Special . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Telecine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Terminal Configurations . . . . . . . . . . . . . . . . . . . . . .78

Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12, 21

Test pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Top Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9, 11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

True . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Turning Off the Projector . . . . . . . . . . . . . . . . . . . . .28

Turning On the Projector . . . . . . . . . . . . . . . . . . . . .27

USB CONNECTOR . . . . . . . . . . . . . . . . . . . . . . . . . .78

USB Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

USB lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

USB memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Warning log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

WARNING TEMP indicator . . . . . . . . . . . . . . . . .10, 60

Wide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Wired Remote Control . . . . . . . . . . . . . . . . . . . .16, 25

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26, 29

Appendix

Downloaded From projector-manual.com Christie Manuals

Appendix

Downloaded From projector-manual.com Christie Manuals

Appendix

Downloaded From projector-manual.com Christie Manuals

Printed in Japan

Part No. 10-A 610 328 2459 (1AA6P1P5105-- KH6K)

Downloaded From projector-manual.com Christie Manuals

Summary of Contents for Christie LX66A





















































































Search results

Summary of Contents for Christie LX66A

Reviews:

Related manuals for Christie LX66A

Brands by name

Popular brands

Christie Christie LX66A, User Manual

Search results

Summary of Contents for Christie LX66A

Reviews:

Related manuals for Christie LX66A

Brands by name

Popular brands