7. Ensure the four projector feet are placed into the holes in the four lock brackets.
8. Adjust the height and tilt of the projector to suit the particular projection requirements.
All four projector feet, on all four corners, must be extended the same amount. The height of
the pedestal leveling feet should be used to compensate for balance problems.
9. Check to ensure adequate space remains at the feet to install the bracket covers.
10. Perform a final alignment (for height, tilt, and position on pedestal) of the projector.
11. Tighten the four lock brackets (front foot and back) installed in Step 5.
12. Install and lock the bracket covers onto the foot brackets with the four M5 screws.
CP4400 Series Dual LOS Pedestal Installation Instructions
Christie CP4400 Series Dual LOS Pedestal Instruction Sheet
5
020-103141-01 Rev. 1 (06-2019)
Copyright
©
2019 Christie Digital Systems USA, Inc. All rights reserved.
