69
Indicators
Projector Condition
LAMP
red
READY
green
WARNING
TEMP.
red
LAMP
REPLACE
orange
The temperature inside the projector is elevated close to the
abnormally high level.
The temperature inside the projector is abnormally high. The projector
cannot be turned on. When the projector is cooled down enough and
the temperature returns to normal, the READY indicator lights green
and the projector can be turned on. (The WARNING TEMP. indicator
keeps blinking.) Check and clean the filter.
The projector has been cooled down enough and the temperature
returns to normal. When turning on the projector, the WARNING TEMP.
indicator stops blinking. Check and clean the filter.
Any of 4 lamps becomes out, Lamp Mode is changed over from 4 lamps to 2
lamps. And when any of 2 lamps are out, a projector operates with 1 lamp.
The lamp has been used overtime. Replace the lamp immediately
and then reset the lamp counter. The indicator will be turned off after
resetting the counter.
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector. If
the projector is turned off again, unplug the AC power cord and contact
the dealer or the service center. Do not leave the projector on. It may
cause an electric shock or a fire hazard.
✽
Appendix
The projector is detecting abnormal condition .
✽
✽
✽
✽
✽
✽
✽
