Christ touch-it xelo Operating Instructions Manual Download Page 43

Page: 43 / 44

Touch-it XELO

Operating Instructions

Copyright / © Christ-Elektronik GmbH

Sep. 2015, Revision 12

a member of the Christ Company Group

Document No.: E461201

6.5

Maintenance plan

INFORMATION!

Only the manufacturer (Christ-Elektronik GmbH) is allowed to replace the
internal lithium battery.

The calibration of the analog resistive touch may be required from time to
time.

6.6

Repairs

DANGER!

Only the qualified staffs are allowed to carry out the repairs. The incorrect
repair may lead to serious danger for the user.

6.7

Cleaning

DANGER!

Disconnect the Touch-it Panel PC from the supply voltage before clean-
ing.

CAUTION!

Do not clean the touch-sensitive surface of the monitor with detergents
containing solvent or acid.

INFORMATION!

Use a humid and soft cloth with gentle soap suds to clean.

Summary of Contents for touch-it xelo













































Search results

Summary of Contents for touch-it xelo

Reviews:

Related manuals for touch-it xelo

Brands by name

Popular brands

Christ touch-it xelo, Operating Instructions Manual

Search results

Summary of Contents for touch-it xelo

Reviews:

Related manuals for touch-it xelo

Brands by name

Popular brands