Touch-it XELO
Operating Instructions
Copyright / © Christ-Elektronik GmbH
16
/
44
Sep. 2015, Revision 12
a member of the Christ Company Group
Document No.: E461201
3.2.1
Changing Display Resolution
In the BIOS Setup mode choose the
Chipset
Menu select
North Bridge
and then
Graphics Configuration.
Set the
LVDS2 Panel Type
Save this configuration by pressing “F4” and selecting “Yes” afterwards.
3.2.2
Changing Boot Priority
In order to boot from a USB Drive the following settings must be done.
In the BIOS Setup mode choose the
Boot
Menu and select
Hard Drive BBS Priorities.
Set the
Boot Option #1
in such a way that the USB Device is first position in the boot list, by
pressing “Enter” and select the USB Device using the Page-Up/Down Keys.
Save this configuration by pressing “F4” and selecting “Yes” afterwards.
