Touch-it CE
Operating Instructions
Christ Elektronik GmbH
8
/
37
www.christ-elektronik.de
Tel.: +49 8331 8371-0
2.1.2
Touch-it CE Front Panel
The variant Touch-it CE Front Panel is designed for front mounting.
Each Front Panel has its own cut-out drawing.
For the appropriated drawing see the specific data sheet.
To clamp the Front Panel into the cut-out you can use the attached fasting clamps.
Fasting Clamp
CAUTION
!
For the best installation result the use of all provided fasting clamps
is highly recommended. Depending on individual installation cir-
cumstances a new IP rating may be considered.
