CLA MixDown / User Guide
10
Bass
Controls the level of a low-shelf filter and adds warmth to the mix.
Range: -10 to +10
Switch: Off or On
Treble
Controls a high-frequency bell EQ band and can add sparkle and clarity.
Range: -10 to +10
Switch: Off or On
Glue
Controls the amount of compression applied to the signal. Higher settings tend to make the mix tighter but less
transparent. Lower settings may result in greater space in parts of the mix.
Range: -10 to +10
Switch: Off or On
There are two compressor types:
•
A modern, punchy compressor.
•
A compressor with a longer time constant. It is good for holding the mix together.
Drive
Sets the amount of harmonic distortion added to the signal. The effect is similar to sending a very high-level signal to an
SSL mix buss.
Range: -10 to +10
Switch: Off or On
