Endura® DD Flush Mount Fan New Installation Planning
57" Flush Mount Direct Drive Endura® Fan
6
Planning the layout of the spacing between Fans is very important. Spacing too close together will cause
interference between the discharge Cones. See the Invertek ODE-3 IP66 Outdoor User Guide, (MV2493) at
www.choretime.com/documents, Manuals, Ventilation, Fans & Shutters, 57-Inch Endura Fans, MV2493
for additional drive mounting requirements.
Endura
®
DD Flush Mount Fan New Installation Planning
70-1/8" [1
78.1cm]
62-3/8
"
[158.3
cm]
4-1/2"
[10.9cm]
54-15/16"
[139.4cm]
7-13/16"
[19.8cm]
6" [15.2cm]
59-1/4" [150
.4cm]
Outside
Fla
nge
Outside the Wall Installation
Outside Wall
"X" =59-1/2" [151.1cm] Minimum
Flat Mounting Surface Required
X
X
1-1/2"
[3.8cm] Typ.
For Outside Wall Mounting
56-1/2"
[143.51m]
Frame Rough Opening
(Through Wall or Outside Mounting)
Important!
Fan
mounting surface must be flat.
1-3/4" [4.4cm] required at
the bottom of the opening.
10" [25
.4cm]
6-3/8"
[11.4cm]
!Important:
Provide Shelter over Cones in areas where
snow or ice could cause damage. CTB, Inc. Warranty
Does
Not
cover damage from external sources.
Important!
Fan Mounting
Surface must be
Flat.
12" [30.5cm]