57" Flush Mount Direct Drive Endura® Fan
Installation
13
Installing the Orifice Frame
Cone Installation
(46764)
(54287)
Rounded Tab on the Cone
Orifice Frame Shown Gray for Clarity.
Important!
Line up the Seam in the Orifice Frame
with one of the rounded Tabs on the Cone.
(53416)
Orifice
Frame
(53611)
Frame
Bracket
(54287) 5/16-18 x 1.00
SS Shldr. Bolt
(46764) 5/16 Flg. Nut
Important!
Before installing a Cone on assembled fan models do either
A or B
below
.
A: Remove the Doors (Below):
To remove the Doors Pull
near the center of the Door to allow the Door Pins to slide
out of the top Door Pivot Bracket. Once the Door is clear of
the Top Pivot Bracket lift it
from the Bottom Pivot Plate
and set aside somewhere safe
to be reinstalled later.
B: Clamp the Doors (Below)
Clamp