22
Status display and function
Using the BUFF, I/P and FREQ buttons on the front panel the Red Reference function can
be selected. The status of these functions is indicated on the left hand display. On initial
switch on and from standby the display will indicate the current settings.
Pressing the input button will change between CD, USB,OPT and XLR functions.
When playing a CD select the CD input to output the signal to the analogue connections.
If you wish to output a source connected via the XLR, USB or optical digital inputs select
XLR, USB or OPT as appropriate. This uses the high quality internal QBD76 decoder to
reproduce the analogue signal.
Lock Indication
When the internal DAC circuitry receives a valid digital signal from any of the digital inputs
CD, USB,OPT or XLR, the display will show LOCK. This will revert back to the frequency
setting after a few seconds.
Pressing the frequency button changes the CD and digital output upsampling frequency
between 44.1, 88.2 and 176.4KHz.
Please note:- On CD mode when listening to a CD 176K will always be automatically
selected.
I/P
FREQ
44K
88K
176K
LOCK
CD
USB
OPT
XLR
