15
File/Preferences/Playback /Output tab and select “WASAPI: Chord Async
USB 44.1kHz–192kHz” as output device.
Other players will require different settings.
Configuring Mac OS X
Open the
System Environment Settings
from the Start menu. Open the
Sound
options from the System Environment settings.
Select the
Output
tab and confirm the Chord Async USB 44.1kHz–192kHz
USB audio codec appearance as the default output device.
Sample Rate Setup
Open the
Audio MIDI Settings
options (
Application
–
Utility
-
Set Audio
MIDI
).
Select the
Audio Output
tab in the
Set Audio MIDI.
Select the desired sample frequency from the options given.
Configuring the player for Kernel Streaming: some examples
FooBar
To use FooBar in KS mode it is necessary to download the DLL for Kernel
Streaming from the FooBar2000 website and install it in the Components sub-
folder inside FooBar2000 main folder in your hard disk. The DLL can be
found at http://www.foobar2000.org/components/view/foo_out_ks. It is a zip
folder which contains the DLL.
Extract it from the zip and copy to the Components folder.
Then, restart FooBar, go to the File/Preferences/Playback/Output window and
set parameters.
5.2. Winamp and MediaMonkey
These two players are actually the same player with different skins, so they
can share the same plug-ins. A freeware plug-in for Kernel Streaming by Steve
Monks is available on the Internet (http://www.stevemonks.com/ksplugin
/
)
that can be used to enable Kernel Streaming operation with these players.
Download the zip file, extract the dll file and copy it into the Plugins folder
inside Winamp main folder. With Red Reference connected, right-click on
Winamp and select Display/Select Plug-ins. The Preferences window of
Winamp will open. Go to Plug-in/Output and select “Kernel Streaming
Output”. Then click on Configure button. Choose Red Reference Kernel
Streaming in the output device list.
Configuring the player for WASAPI: an example
FooBar
To use FooBar with WASAPI under Windows 7 it is necessary to download
the DLL for WASAPI from the FooBar2000 website and install it in the
Components sub-folder inside FooBar2000 main folder on your hard disk.
The DLL can be found at
http://www.foobar2000.org/components/view/foo_out_wasapi . It is a
zip folder which contains the DLL. Extract it from the zip and copy to the
Components folder.
Then, restart FooBar, go to the File/Preferences/Playback/Output window and
set parameters.
Sample rate setup for Red Reference (Windows Vista Example)
