16
Once the driver software has been installed and the Red Reference connected
to a Windows based computer then the digital audio sample rate needs to be
set as follows:-
Stage 1:- Configuring audio devices
Connect the Red Reference to the computer with the supplied USB cable.
Run the Windows Control panel and select Hardware and Sound
The select „Manage Audio Devices‟
Here you have a list of the connected audio devices. The Red Reference is
identified as a digital output device with the „Chord Async USB 44.1kHz-
192kHz‟ driver installed. Shown at the top of the list here. Right click the
digital output and select properties to show the following screen:-
