NU20 User Manual
Receiver Front Panel
1.
Power on/standby switch
3. Channel volume controls
2.
RF carrier signal indicators
4. AF audio signal indicators
Receiver Rear Panel
5.
DC power input jack
8. CH.B balanced XLRM output
6.
CH.B antenna connection (BNC)
9. CH.A balanced XLRM output
7.
6.3mm jack output (CH.A + CH.B mix)
10. CH.A antenna connection (BNC)
Transmitters
Note: If replacement transmitters are required, these must be genuine Chord branded transmitters
which transmit the correct pilot tone to match with the receiver. Transmitters which have the
same carrier frequency but not the correct pilot tone will not work with NU-20 receivers.
11. On indicator (handheld)
12. On/off switch (handheld)
13. Battery compartment (handheld)
14. Antenna
15. On indicator (bodypack)
16. On/off switch (bodypack)
17. 3.5mm threaded jack socket
18. Gain control
19. Battery compartment (bodypack)
